Hey,
Also, to get MWI ( Dialog message-summary ) to work with my linksys, I
have this parameter :
modparam("presence", "max_expires", 2147483647 )
The Linksys never resubcribe to MWI. So watch out for that one.
David
Klaus Darilion a écrit :
You are right - if the presence server is
included in the "normal"
proxy, then the SUBSCRIBE-dialogs do not have a route-set and thus
can not be routed with loose_route. Adding the exception for PUBLISH
too should not be necessary as PUBLISH never have to-tag.
It was fixed int he default config for 1.5. Take a look at
http://openser.svn.sourceforge.net/viewvc/openser/branches/1.5/etc/kamailio…
regards
klaus
PS: Some older SNOM phones had a bug and sent in-dialog SUBSCRIBE
without using the Contact provided by the presence server, but
instead always using the initial SUBSCRIBE URI. Depending on your
config this can cause problems too.
David schrieb:
> All,
>
> I upgraded to Kamailio 1.5 and had a lot of problems getting BLF and
> MWI working. So I will list here some of my notes in case some body
> else ever has the same issue.
>
> Firstly, in my tests I am using a GXP2000, GXP2020 and a SPA962. I
> also tested with a SNOM360.
>
> my issue was the MWI seemed to fail after an hour, and I could not
> find why. So in searching my config, I found that when the phones
> were resubscribing to MWI and BLF, it was being caught in this
> condition :
>
> if (has_totag()) {
> if (loose_route()) {
> if (is_method("BYE")) {
> setflag(1); # do accouting ...
> setflag(3); # ... even if the transaction fails
> }
> route(4);
> }
> else {
> sl_send_reply("404","Not here");
> exit;
> }
> }
>
> My subscribe code handling was after this block, I noticed the issue
> from the 404 the grandstream was getting when trying to subscribe. I
> therefore added handling for the subscribe packets in this section,
> and my MWI and BLF seems to be working.
>
> else if ( is_method("PUBLISH") || is_method("SUBSCRIBE") )
> {
> route(5);
> exit ;
> }
>
> Where route(5) does the appropriate handling of these two types of
> SIP packets.
>
> It should be noted, when I speak of MWI I am referring to presence
> message-summary which is sent via a publish by my media application.
> When I write BLF, I am referring to Presence Dialog.
>
> So when my phones were resubscribing, they are being sent a 404.
>
> I tested the Grandstream and the Linksys, and both seem to have the
> problem resolved. I will test this with the Snom tomorrow and post
> my results.
>
> David
>
>
>
>
> _______________________________________________
> Kamailio (OpenSER) - Users mailing list
> Users(a)lists.kamailio.org
>
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
>
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org