Re: [Serusers] ERROR: bad config file (1 errors)

I think i mentioned /var/log/messages... That's the file

On 6/23/06, mukesh mukesh@hungama.com wrote:

Thanks you olivier.

Can you be little more specific, where this message file is located ?

Regards Mukesh

-----Original Message----- From: olivier.taylor [mailto:olivier.taylor@gmail.com] Sent: Thursday, June 22, 2006 9:55 PM To: mukesh Cc: serusers@lists.iptel.org Subject: Re: [Serusers] ERROR: bad config file (1 errors)

see the message file, you will find there the line wich is not correct on your ser.cfg

Olivier

mukesh a écrit :

...

Hi I am getting "ERROR: bad config file (1 errors)" while truing to execute the SER.

And I could not figure out whats wrong with this line loadmodule "/usr/local/lib/ser/modules/mysql.so"

If I comment it then everything is file.

Following is my ser.cfg file ---------------------------------ser.cfg star------------------------------ # # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ # # simple quick-start config script #

# ----------- global configuration parameters ------------------------

debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E)

listen=192.87.41.149 #this address has been changed

# hostname matching an alias will satisfy the condition uri==myself". alias=sip.myserver.com

/* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */

#check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" #added by mukesh

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params -- modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") #added by mukesh modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)

# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy #modparam("rr", "enable_full_lr", 1)

# ------------------------- request routing logic -------------------

# main routing logic

route{

  # initial sanity checks -- messages with
  # max_forwards==0, or excessively long requests
  if (!mf_process_maxfwd_header("10")) {
          sl_send_reply("483","Too Many Hops");
          break;
  };
  if (msg:len >=  2048 ) {
          sl_send_reply("513", "Message too big");
          break;
  };


  # we record-route all messages -- to make sure that
  # subsequent messages will go through our proxy; that's
  # particularly good if upstream and downstream entities
  # use different transport protocol
  if (!method=="REGISTER") record_route();

  # subsequent messages withing a dialog should take the
  # path determined by record-routing
  if (loose_route()) {
          # mark routing logic in request
          append_hf("P-hint: rr-enforced\r\n");
          route(1);
          break;
  };

  if (!uri==myself) {
          # mark routing logic in request
          append_hf("P-hint: outbound\r\n");
          route(1);
          break;
  };

  # if the request is for other domain use UsrLoc
  # (in case, it does not work, use the following command
  # with proper names and addresses in it)
  if (uri==myself) {

          if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication if (!www_authorize("sip.myserver.com", "subscriber")) { www_challenge("ser.hungama.com", "0"); break; };

                  save("location");
                  break;
          };

          lookup("aliases");
          if (!uri==myself) {
                  append_hf("P-hint: outbound alias\r\n");
                  route(1);
                  break;
          };

          # native SIP destinations are handled using our USRLOC DB
          if (!lookup("location")) {
                  sl_send_reply("404", "Not Found");
                  break;
          };
  };
  append_hf("P-hint: usrloc applied\r\n");
  route(1);

}

route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; }

---------------------------------ser.cfg ends------------------------------

Any help/suggestion is highly appreciated.

Regards Mukesh

---

Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

---

Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers