Hello Everyone, I have inlcude auth_diameter module in the openser.cfg. It works fine with DISC. I can authorize the user with same. When i increase the call rate using sipp tool at that time the openser going to crash. It disconnect the connection.
The openser shows me this output.
1(19698) SIP Request: 1(19698) method: <REGISTER> 1(19698) uri: sip:192.168.1.66 1(19698) version: <SIP/2.0> 1(19698) parse_headers: flags=2 1(19698) end of header reached, state=5 1(19698) parse_headers: Via found, flags=2 1(19698) parse_headers: this is the first via 1(19698) After parse_msg... 1(19698) preparing to run routing scripts... 1(19698) parse_headers: flags=100 1(19698) DEBUG:parse_to:end of header reached, state=10 1(19698) DBUG:parse_to: display={1113}, ruri={sip:1113@192.168.1.66:5060} 1(19698) DEBUG: get_hdr_field: <To> [35]; uri=[sip:1113@192.168.1.66:5060] 1(19698) DEBUG: to body [1113 sip:1113@192.168.1.66:5060 ] 1(19698) get_hdr_field: cseq <CSeq>: <1> <REGISTER> 1(19698) DEBUG:maxfwd:is_maxfwd_present: value = 70 1(19698) parse_headers: flags=200 1(19698) DEBUG: get_hdr_body : content_length=0 1(19698) found end of header 1(19698) find_first_route: No Route headers found 1(19698) loose_route: There is no Route HF 1(19698) grep_sock_info - checking if host==us: 12==12 && [192.168.1.66] == [192.168.1.66] 1(19698) grep_sock_info - checking if port 5060 matches port 5060 1(19698) grep_sock_info - checking if host==us: 12==12 && [192.168.1.66] == [192.168.1.66] 1(19698) grep_sock_info - checking if port 5060 matches port 5060 1(19698) parse_headers: flags=4000 1(19698) auth_diameter:pre_auth(): Credentials with given realm not found 1(19698) ******* m_id=3 1(19698) DEBUG:do_read (sock=8): whole message read (len=304)! 1(19698) ######## m_id=3 1(19698) parse_headers: flags=ffffffffffffffff 1(19698) check_via_address(192.168.1.1, 192.168.1.1, 0) 1(19698) build_auth_hf(): 'WWW-Authenticate: Digest realm="192.168.1.66", nonce="484e1d9a81643c688e09493c7b615dacbc004e81", qop="auth" ' 1(19698) parse_headers: flags=ffffffffffffffff 1(19698) check_via_address(192.168.1.1, 192.168.1.1, 0) 1(19698) DEBUG:destroy_avp_list: destroying list (nil) 1(19698) receive_msg: cleaning up 4(19703) SIP Request: 4(19703) method: <ACK> 4(19703) uri: sip:192.168.1.66 4(19703) version: <SIP/2.0> 4(19703) parse_headers: flags=2 4(19703) end of header reached, state=5 4(19703) parse_headers: Via found, flags=2 4(19703) parse_headers: this is the first via 4(19703) After parse_msg... 4(19703) preparing to run routing scripts... 4(19703) parse_headers: flags=8 4(19703) DEBUG: add_param: tag=71db33f84c952ca903e2273ad59f1848.3074 4(19703) DEBUG:parse_to:end of header reached, state=29 4(19703) DBUG:parse_to: display={sut}, ruri={sip:1113@192.168.1.66:5060} 4(19703) DEBUG: get_hdr_field: <To> [76]; uri=[sip:1113@192.168.1.66:5060] 4(19703) DEBUG: to body [sut sip:1113@192.168.1.66:5060] 4(19703) DEBUG: sl_filter_ACK : local ACK found -> dropping it! 4(19703) DEBUG:destroy_avp_list: destroying list (nil) 4(19703) receive_msg: cleaning up 2(19699) SIP Request: 2(19699) method: <REGISTER> 2(19699) uri: sip:192.168.1.66 2(19699) version: <SIP/2.0> 2(19699) parse_headers: flags=2 2(19699) end of header reached, state=5 2(19699) parse_headers: Via found, flags=2 2(19699) parse_headers: this is the first via 2(19699) After parse_msg... 2(19699) preparing to run routing scripts... 2(19699) parse_headers: flags=100 2(19699) DEBUG:parse_to:end of header reached, state=10 2(19699) DBUG:parse_to: display={1113}, ruri={sip:1113@192.168.1.66:5060} 2(19699) DEBUG: get_hdr_field: <To> [35]; uri=[sip:1113@192.168.1.66:5060] 2(19699) DEBUG: to body [1113 sip:1113@192.168.1.66:5060 ] 2(19699) get_hdr_field: cseq <CSeq>: <2> <REGISTER> 2(19699) DEBUG:maxfwd:is_maxfwd_present: value = 70 2(19699) parse_headers: flags=200 2(19699) DEBUG: get_hdr_body : content_length=0 2(19699) found end of header 2(19699) find_first_route: No Route headers found 2(19699) loose_route: There is no Route HF 2(19699) grep_sock_info - checking if host==us: 12==12 && [192.168.1.66] == [192.168.1.66] 2(19699) grep_sock_info - checking if port 5060 matches port 5060 2(19699) grep_sock_info - checking if host==us: 12==12 && [192.168.1.66] == [192.168.1.66] 2(19699) grep_sock_info - checking if port 5060 matches port 5060 2(19699) ******* m_id=3 2(19699) DEBUG:do_read (sock=9): whole message read (len=208)! 2(19699) ######## m_id=3 2(19699) parse_headers: flags=ffffffffffffffff 2(19699) parse_headers: flags=8000000 2(19699) parse_headers: flags=ffffffffffffffff 2(19699) build_contact(): Created Contact HF: Contact: sip:1113@192.168.1.5:5060;expires=27, sip:1113@192.168.1.1:5060;expires=3600
2(19699) parse_headers: flags=ffffffffffffffff 2(19699) check_via_address(192.168.1.1, 192.168.1.1, 0) 2(19699) DEBUG:destroy_avp_list: destroying list (nil) 2(19699) receive_msg: cleaning up 4(19703) SIP Request: 4(19703) method: <ACK> 4(19703) uri: sip:192.168.1.66 4(19703) version: <SIP/2.0> 4(19703) parse_headers: flags=2 4(19703) end of header reached, state=5 4(19703) parse_headers: Via found, flags=2 4(19703) parse_headers: this is the first via 4(19703) After parse_msg... 4(19703) preparing to run routing scripts... 4(19703) parse_headers: flags=8 4(19703) DEBUG: add_param: tag=71db33f84c952ca903e2273ad59f1848.3074 4(19703) DEBUG:parse_to:end of header reached, state=29 4(19703) DBUG:parse_to: display={sut}, ruri={sip:1113@192.168.1.66:5060} 4(19703) DEBUG: get_hdr_field: <To> [76]; uri=[sip:1113@192.168.1.66:5060] 4(19703) DEBUG: to body [sut sip:1113@192.168.1.66:5060] 4(19703) DEBUG: sl_filter_ACK : local ACK found -> dropping it! 4(19703) DEBUG:destroy_avp_list: destroying list (nil) 4(19703) receive_msg: cleaning up 10(19717) ERROR: receive_fd: EOF on 8 10(19717) DBG: handle_ser_child: dead child 3, pid 19701 (shutting down?) 10(19717) DBG: io_watch_del (0x6d31a0, 8, -1, 0x0) fd_no=14 called 0(19695) child process 19701 exited by a signal 11 0(19695) core was generated 0(19695) INFO: terminating due to SIGCHLD 8(19712) INFO: signal 15 received 8(19712) 4(19703) 7(19710) Memory status (pkg): 2(19699) INFO: signal 15 received 2(19699) Memory status (pkg): 2(19699) fm_status (0x705700): 2(19699) heap size= 1048576 2(19699) used= 18682, used+overhead=56810, free=991766 2(19699) max used (+overhead)= 61502 2(19699) dumping free list: 2(19699) hash = 1 fragments no.: 2, unused: 0 bucket size: 8 - 8 (first 8) 2(19699) hash = 2 fragments no.: 3, unused: 0 bucket size: 16 - 16 (first 16) 2(19699) INFO: signal 15 received INFO: signal 15 received 8(19712) fm_status (0x705700): 8(19712) heap size= 1048576 8(19712) used= 75736, used+overhead=113464, free=935112 8(19712) 6(19708) hash = 3 fragments no.: 1, unused: 0 bucket size: 24 - 24 (first 30) 2(19699) hash = 6 fragments no.: 1, unused: 0 bucket size: 48 - 48 (first 48) 2(19699) hash = 8 fragments no.: 5, unused: 0 bucket size: 64 - 64 (first 64) 2(19699) 4(19703) 7(19710) INFO: signal 15 received 6(19708) Memory status (pkg): 6(19708) fm_status (0x705700): 6(19708) heap size= 1048576 6(19708) used= 75736, used+overhead=113464, free=935112 6(19708) max used (+overhead)= 113464 6(19708) dumping free list: 6(19708) hash = 27 fragments no.: 1, unused: 0 bucket size: 216 - 216 (first 216) 6(19708) hash = 39 fragments no.: 11, unused: 0 bucket size: 312 - 312 (first 312) 6(19708) hash = 73 fragments no.: 1, unused: 0 bucket size: 584 - 584 (first 584) 6(19708) hash = 192 fragments no.: 1, unused: 0 bucket size: 1536 - 1536 (first 1536) 6(19708) hash = 2054 fragments no.: 1, unused: 0 bucket size: 524288 - 1048576 (first 929344) 6(19708) TOTAL: 15 free fragments = 935112 free bytes 6(19708) ----------------------------- 1(19698) INFO: signal 15 received 1(19698) Memory status (pkg): 1(19698) fm_status (0x705700): 1(19698) heap size= 1048576 1(19698) used= 20040, used+overhead=58424, free=990152 1(19698) max used (+overhead)= 62264 1(19698) dumping free list: 1(19698) hash = 1 fragments no.: 2, unused: 0 bucket size: 8 - 8 (first 8) 1(19698) hash = 2 fragments no.: 3, unused: 0 bucket size: 16 - 16 (first 16) 1(19698) hash = 3 fragments no.: 1, unused: 0 bucket size: 24 - 24 (first 30) 1(19698) hash = 6 fragments no.: 1, unused: 0 bucket size: 48 - 48 (first 48) 1(19698) hash = 8 fragments no.: 5, unused: 0 bucket size: 64 - 64 (first 64) 1(19698) hash = 9 fragments no.: 9, unused: 0 bucket size: 72 - 72 (first 72) 1(19698) hash = 10 fragments no.: 1, unused: 0 bucket size: 80 - 80 (first 80) 1(19698) hash = 11 fragments no.: 1, unused: 0 bucket size: 88 - 88 (first 88) 1(19698) hash = 15 fragments no.: 1, unused: 0 bucket size: 120 - 120 (first 120) 10(19717) INFO: signal 15 received 10(19717) Memory status (pkg): 10(19717) fm_status (0x705700):
I have also try with to solve it with gdb,but cant help.
The gdb output as follows,
(gdb) Loaded symbols for /usr/local/lib64/openser/modules/auth_diameter.so Reading symbols from /usr/local/lib64/openser/modules/domain.so...done. Loaded symbols for /usr/local/lib64/openser/modules/domain.so Reading symbols from /lib64/libnss_files.so.2...done. Loaded symbols for /lib64/libnss_files.so.2 Core was generated by `openser'. Program terminated with signal 11, Segmentation fault. #0 0x00002aaaabfa2b72 in AAAAddAVPToMessage (msg=0x713cd8, avp=0x713330, position=0x713b08) at avp.c:178 178 for(avp_t=msg->avpList.head;avp_t&&avp_t!=position;avp_t=avp_t->next); (gdb)
What was the problem ?? Please explain me.
Thanks in advance.
Regards, Dilip Modi