thks Steve but
i update my ios to IOS (tm) 5300 Software (C5300-IS-M), Version 12.3
(10),RELEASE SOFTWARE (fc3)
and enter :
tahoGWPSTNUDI(config)# voice class codec 2
tahoGWPSTNUDI(config-class)#  codec preference 1 g711ulaw
                                                 ^
% Invalid input detected at '^' marker.

tahoGWPSTNUDI(config-class)#  codec preference 2 g729r8 bytes 40
                                                 ^
% Invalid input detected at '^' marker.

tahoGWPSTNUDI(config-class)#  codec preference 3 g723r63 bytes 96
                                                 ^
% Invalid input detected at '^' marker.

tahoGWPSTNUDI(config-class)#  codec preference 4 g726r16 bytes 80
                                                 ^
% Invalid input detected at '^' marker.

tahoGWPSTNUDI(config-class)#  codec preference 5 gsmfr bytes 132
                                                 ^
% Invalid input detected at '^' marker.
but dont work please send me 
dir flash result:  


Em Seg 11 Abr 2005 19:59, você escreveu:
  

12.1 is pretty old from a Cisco SIP perspective. I'd encourage you
to upgrade to a newer release, preferrably 12.3(x), and then try:

    

 voice class codec 2
  codec preference 1 g711ulaw
  codec preference 2 g729r8 bytes 40
  codec preference 3 g723r63 bytes 96
  codec preference 4 g726r16 bytes 80
  codec preference 5 gsmfr bytes 132
  

 You can list which ever codecs are most important for your application.
This is just an example.

-Steve

Welesley Sibelson Dias wrote:
    

I have one AS5300 with :
Cisco Internetwork Operating System Software
IOS (tm) 5300 Software (C5300-JS-M), Version 12.1(1)T,  RELEASE SOFTWARE
(fc1) Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Sun 19-Mar-00 01:19 by ccai
Image text-base: 0x600088F8, data-base: 0x61150000

ROM: System Bootstrap, Version 11.2(9)XA, RELEASE SOFTWARE (fc2)
BOOTFLASH: 5300 Software (C5300-BOOT-M), Version 12.0(4)T1,  RELEASE
SOFTWARE ()

tahoGWPSTNUDI uptime is 3 minutes
System returned to ROM by reload at 00:06:02 UTC Sat Jan 1 2000
System image file is "flash:c5300-js-mz.121-1.T"

cisco AS5300 (R4K) processor (revision A.32) with 65536K/16384K bytes of
memory.
Processor board ID 10080984
R4700 CPU at 150Mhz, Implementation 33, Rev 1.0, 512KB L2 Cache
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Primary Rate ISDN software, Version 1.1Backplane revision 2
Manufacture Cookie Info:
EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x30,
Board Hardware Version 3.2, Item Number 73-2414-6,
Board Revision C0, Serial Number 10080984,
PLD/ISP Version 255.255, Manufacture Date 14-Oct-1998.
1 Ethernet/IEEE 802.3 interface(s)
1 FastEthernet/IEEE 802.3 interface(s)
35 Serial network interface(s)
240 terminal line(s)
8 Channelized E1/PRI port(s)
128K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
8192K bytes of processor board Boot flash (Read/Write)

Directory of flash:/

 1  -rw-     9358184              <no date>  c5300-js-mz.121-1.T
 2  -rw-      465798              <no date>  pw.2711.ios


but i can't  configure codecs
i enter into voice-class e
enter preference codec but don't accept
somebody know with more need me .


thks a lot
Welesley Sibelson Dias

_______________________________________________
Serusers mailing list
serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
      

_______________________________________________
Serusers mailing list
serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers