Re: [Serusers] Call waiting and accounting

Hi Jai,

That's the mean I used to provide call forward :

In route[3] :

# ----------------------------------- Mark the CFU ---------------------------------- if (avp_db_load("$ruri/username", "s:cfu/usr_callfw")) { setflag(22); avp_pushto("$ruri", "s:cfu"); route(30); route(1); break; }; # ----------------------------------- Mark the CFB ----------------------------------- if (avp_db_load("$ruri/username", "s:cfb/usr_callfw")) { if (!avp_check("s:cfb", "eq/$ruri/i")) { setflag(20); }; }; # ----------------------------------- Mark the CFNA ----------------------------------- if (avp_db_load("$ruri/username", "s:cfna/usr_callfw")) { if (!avp_check("s:cfna", "eq/$ruri/i")) { setflag(21); }; };

For CFU I put the result taken from DB directly in URI and route to PSTN.

For CFB & CFNA I do the same treatment but with an other way with a flag. In the failure route :

if (isflagset(20) && t_check_status("486")) { if (avp_pushto("$ruri", "s:cfb")) { avp_delete("s:cfb"); resetflag(20); setflag(23); xlog("L_WARN","time=[%Tf] call id=[%ci] call seq=[%cs] contact header=[%ct] from uri=[%fu] from tag=[%ft] request's method=[%rm] request's uri=[%ru] to uri=[%tu] to tag=[%tt] sip message id=[%mi] process id=[%pp] ip source=[%is] flags=[%mf], Forward on busy\n"); route(30); route(1); break; }; };

Sincerely,

Adrien

Le vendredi 15 juin 2007 à 08:34 -0700, Jai Rangi a écrit :

Hello Igne, Can you please share the piece of code for this.

Thank you, -Jai On 6/15/07, inge inge@legos.fr wrote: Hi Jai,

    I don't have problems with caller ID. In a case of CFNA/CFB or
    CFU, I
    see on the terminal the right caller id.

    I think thanks to unchange sip_from/sip_to URI, wich were use
    for
    signalisation maybe. 


    Le mardi 12 juin 2007 à 16:28 -0700, Jai Rangi a écrit :
    > Not only billing part, but for caller id also. The final
    destination
    > should see the right caller id (Original call generator).
    > Can you please share where I can find such a plugin. I have
    been 
    > looking for something like that.
    >
    > Thank you,
    > -Jai
    >
    >
    > On 6/11/07, inge <inge@legos.fr> wrote:
    >         Hi Greger,
    > 
    >         Thanks for you answer and sorry for mine, I was away
    from my
    >         office
    >         since some days.
    >
    >         In fact, it's a very special case. But finally I can
    see the 
    >         forward
    >         with i_uri and o_uri in my acc table. So I just have
    to add a
    >         plugin in
    >         my script for use i_uri and o_uri instead of
    sip_from/to
    >         according to 
    >         some rules.
    >
    >         Regards
    >
    >         Le mardi 22 mai 2007 à 07:06 +0200, Greger V. Teigre
    a écrit :
    >         > Well, call forwarding is always a special case
    because you 
    >         need to get
    >         > the billing right according to how your billing
    app needs
    >         it. Look at
    >         > the INVITE that comes for call forwarding and test
    for it in
    >         your
    >         > script.
    >
    >         _______________________________________________
    >         Serusers mailing list
    >         Serusers@lists.iptel.org
    >         http://lists.iptel.org/mailman/listinfo/serusers
    >