Hi all,
I have a Ser 0.8.10-2 install on a Redhat 7.3 kernel 2.4.18-3.
As clients I use Pingtel and messenger 4.7. I have followed the setup guide on http://www.fitawi.com/ser-Howto.html
I can register the pingtel phone with no problem. I can call from the PSTN to the pingtel via a Cisco AS5300 with no problems.
When i try toi call from pingtel to PSTN iget the following answer:
1. from pingtel to ser - INVITE sip:<pstnnumber>@serserver_ip 2. from ser to pingtel - Status: 100 trying 3. from ser to cisco - INVITE sip:<pstnnumber>@serserver_ip 4. from cisco to ser - Status: 400 bad request - ínvalid IP address' 5. from cisco to ser - Status: 400 bad request - ínvalid IP address'
This is my ser.cfg:
# $Id: ser.cfg,v 1.12 2002/10/21 02:40:06 jiri Exp $ # # simple quick-start config script #
# ----------- global configuration parameters ------------------------
debug=4 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database loadmodule "//usr/lib/ser/modules/mysql.so"
loadmodule "//usr/lib/ser/modules/sl.so" loadmodule "//usr/lib/ser/modules/tm.so" loadmodule "//usr/lib/ser/modules/rr.so" loadmodule "//usr/lib/ser/modules/maxfwd.so" loadmodule "//usr/lib/ser/modules/usrloc.so" loadmodule "//usr/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "//usr/lib/ser/modules/auth.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)
# -- auth params -- # Uncomment if you are using auth module # #modparam("auth", "secret", "alsdkhglaksdhfkloiwr") modparam("auth", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth", "password_column", "password")
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwars==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; };
# Do strict routing if pre-loaded route headers present rewriteFromRoute();
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication if (!www_authorize("norrtull.nexus.se", "subscriber")) { www_challenge("norrtull.nexus.se", "0"); break; };
save("location"); break; };
# attempt handoff to PSTN
if (uri=~"^sip:1[0-9]*@norrtull.nexus.se") { ## This assumes that the caller is log("Forwarding to PSTN\n"); ## registered in our realm t_relay_to( "cisco_ip", "5060"); ## Our Cisco router break; };
# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now if (!t_relay()) { sl_reply_error(); };
}
---------------------------------
In the cisco I have the following config:
! dail-peer voice 25 voip destination-pattern XXXX session protocol sipv2 codec g711alaw no vad session target ipv4:serserver_ip !
I have added 2 subscribers with the serctl command and registration is working well from pingtel. In Messenger 4.7 it's not working at all. I get 401 Unauthorized.
Well I think thats about it..
Please feel free to contact me if you need more information
Best regards
Rikard Westlund
_________________________________________________________________ Tired of spam? Get advanced junk mail protection with MSN 8. http://join.msn.com/?page=features/junkmail