21 Mar
2007
21 Mar
'07
5:38 p.m.
Is this something new to 1.2? If yes it should be on the migration wiki
regards
klaus
Ovidiu Sas wrote:
Yup. This is how we can avoid having the same
question posted over
and over again ....
Regards,
Ovidiu Sas
On 3/21/07, Daniel-Constantin Mierla <daniel(a)voice-system.ro> wrote:
You should keep cc-ing mailing lists, so people
coming after a while,
with same issue, will be reading mail thread and see that the given
solution was right.
Thanks,
Daniel
On 03/20/07 21:42, Tim Madorma wrote:
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users Got it. thanks so much!
Tim
On 3/20/07, Daniel-Constantin Mierla <daniel(a)voice-system.ro> wrote:
> Hello,
>
> On 03/20/07 17:39, Tim Madorma wrote:
> > Hi,
> >
> > I have put the OpenSER version 1.2 behind a BIG IP load balancer
which
> > provides a static private IP address
(10.1.1.20) via NAT to the
> > OpenSER. In our application, the clients will send to one of the
three
> > public addresses that are defined as
aliases:
> >
> > alias="65.185.232.62:5061"
> > alias="65.185.232.62:5062"
> > alias="65.185.232.62:5063"
> you have to remove quotes around the value of alias parameters. As
it is
> now, the value between quotes is considered
to be hostname.
> alias=65.185.232.62:5061
> alias=65.185.232.62:5062
> alias=65.185.232.62:5063
>
> Same case as it was reported by Juha, today with loose routing ...
>
> Cheers,
> Daniel
>
> >
> > An incoming OPTIONS message is received with the host in the REQ URI
> > set to 65.185.232.62:5063 is received and when it hits this
section of
> > openser.cfg:
> >
> > if (!uri==myself) {
> > # mark routing logic in request
> > append_hf("P-hint: outbound\r\n");
> > route(1);
> > };
> >
> > it executes within the if conditional and tries to route the OPTIONS
> > message. I am wondering why uri does not match myself. The debug
> > output from the log is as follows (it seems that the alias
assignments
> > are not working):
> >
> >
> > Mar 19 16:41:11 homer openser[2267]: [ID 487083 local0.debug]
> > grep_sock_info - checking if host==us: 13==9 && [65.185.232.62]
== [1
> > 0.1.1.20]
> > Mar 19 16:41:11 homer openser[2267]: [ID 375670 local0.debug]
> > grep_sock_info - checking if port 5061 matches port 5063
> > Mar 19 16:41:11 homer openser[2267]: [ID 487083 local0.debug]
> > grep_sock_info - checking if host==us: 13==9 && [65.185.232.62]
== [1
> > 0.1.1.20]
> > Mar 19 16:41:11 homer openser[2267]: [ID 375670 local0.debug]
> > grep_sock_info - checking if port 5062 matches port 5063
> > Mar 19 16:41:11 homer openser[2267]: [ID 487083 local0.debug]
> > grep_sock_info - checking if host==us: 13==9 && [65.185.232.62]
== [1
> > 0.1.1.20]
> > Mar 19 16:41:11 homer openser[2267]: [ID 375670 local0.debug]
> > grep_sock_info - checking if port 5063 matches port 5063
> > Mar 19 16:41:11 homer openser[2267]: [ID 140248 local0.debug]
> > DEBUG:check_self: host != me
> >
> >
> > Any suggestions? I have not tried this in any other version. Is
this a
>
possible bug in 1.2?
>
> thanks,
> Tim
>
> _______________________________________________
> Users mailing list
> Users(a)openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>