Argh!!! The formatting came out wrong... it should be:
as5348#conf t
Enter configuration commands, one per line. End with CNTL/Z.
as5348(config)#voice service ( I hit tab here)
as5348(config)#voice service voip
as5348(conf-voi-serv)#sip
as5348(conf-serv-sip)#exit (Do a ? here to change defaults....)
as5348(conf-voi-serv)#exit
as5348(config)#exit
It seems that some mail readers are hosed, like mine, and it ran it all together.
--Dave
-----Original Message----- From: serusers-bounces@iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of David R. Kompel Sent: Sunday, February 22, 2004 2:29 PM To: 'Arnd Vehling' Cc: serusers@lists.iptel.org; 'Vocal List' Subject: RE: [Serusers] SIP and H323 dialout simultaniously on a cisco
In global config:
as5348#conf t Enter configuration commands, one per line. End with CNTL/Z. as5348(config)#voice service ( I hit tab here) as5348(config)#voice service voip as5348(conf-voi-serv)#sip as5348(conf-serv-sip)#exit (Do a ? here to change defaults....) as5348(conf-voi-serv)#exit as5348(config)#exit as5348#
Later down in the config...
gateway ! sip-ua max-forwards 15 sip-server ipv4:206.82.248.10:5060 ! !
The SIP-UA is optional, but it will be the default if it's not specified in the dial-peer.
VoIP inbound dial-peer's that don't specify a session protocol or specify SIP will be used for inbound SIP calls.
POTS outbound peers will be used by both SIP and H.323.
--Dava
-----Original Message----- From: Arnd Vehling [mailto:av@nethead.de] Sent: Saturday, February 21, 2004 12:23 PM To: David R. Kompel Cc: 'Vocal List'; serusers@lists.iptel.org Subject: Re: [Serusers] SIP and H323 dialout simultaniously on a cisco
Hi,
David R. Kompel wrote:
It's very easy. Do NOTHING. Just turn on SIP and H.323, and have POTS dial-peers.
What do you exactly mean by "turning on sip". I did define a sip-ua and left the dial-peers alone at first and then tried with additional dial-peers from another cisco box which was only serving SIP calls.
The cisco is running: IOS (tm) 5300 Software (C5300-IS-M), Version 12.2(5)
Its still declining our calls with: (ips and numbers obfuscated) ----- Status line: SIP/2.0 500 Internal Server Error Message Header Via: SIP/2.0/UDP yy.yy.yy.y;branch=z9hG4bK0ab8.39e9e396.0,SIP/2.0/UDP 192.168.39.240:5050 ;rport=5050;received=bb.bb.bb.b;branch=z9hG4bK-8c71c34e From: Arnd's Fone sip:4223@somewhere.net;tag=3d65dfe327e89df8 To: sip:1234567@somewhere.net;tag=C9EC008-167B Date: Sat, 21 Feb 2004 20:23:28 UTC Call-ID: de8af4d7-d8db3566@192.168.69.241 Server: Cisco VoIP Gateway/ IOS 12.x/ SIP enabled CSeq: 101 INVITE Content-Length: 0 -----
Is it possible that there must be no h323 config on the ethernet like: (again obfuscated)
----- interface ethernet 0/0 h323-gateway voip interface h323-gateway voip id SOMEGK ipaddr a.b.c.d 1718 h323-gateway voip h323-id DASECRET -----
I cant remove this definitions because this cisco is in production and its not ours.
thanx & best regards,
Arnd
_______________________________________________ Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers