[Serusers] Newby: What am i doing wrong

Hi all, I have been hunting for a solution to my problem now for a couple of days. I am trying to set up connectivity so that we can have conference calling using X-Pro (http://www.xten.com/) as I live in Australia and our company is based in New York, London and Costa Rica. I have installed ser from the CVS file as I have read that it solves a number of bugs, but cannot get out of this problem of not being able to log into the service. Here is the setup. SER is installed in London on RedHat 7.1 with MYSQL / SerWeb and sits behind a Cisco PIX 515UR (NAT) with 5060 open and no fixup happening. I am located in Australia behind a DLINK 604+ router with NAT installed. I can connect to SER fine as I am running it now with debugging to the command line, but I keep getting the same error in the log file. 0(1464) pre_auth(): Credentials with given realm not found I have tried setting up using Windows Messenger and still get the same errror. I have configured the DNS server to return the correct IP 10.0.0.20 when It looks up casinoreality.co.uk as I thought that was a problem. Am I making a simple mistake? Thanks in advance. Nicholas Irving nirving(a)casinoreality.com Here is the log that is being produced. 0(1464) parse_headers: flags=-1 0(1464) check_via_address(220.240.68.206, 220.240.68.206, 0) 0(1464) receive_msg: cleaning up 0(1464) SIP Request: 0(1464) method: <REGISTER> 0(1464) uri: <sip:casinoreality.co.uk> 0(1464) version: <SIP/2.0> 0(1464) parse_headers: flags=1 0(1464) end of header reached, state=5 0(1464) parse_headers: Via found, flags=1 0(1464) parse_headers: this is the first via 0(1464) After parse_msg... 0(1464) preparing to run routing scripts... 0(1464) DEBUG : is_maxfwd_present: searching for max_forwards header 0(1464) parse_headers: flags=128 0(1464) end of header reached, state=9 0(1464) DEBUG: get_hdr_field: <To> [32]; uri=[sip:8910@casinoreality.co.uk] 0(1464) DEBUG: to body [<sip:8910@casinoreality.co.uk>] 0(1464) get_hdr_field: cseq <CSeq>: <5620> <REGISTER> 0(1464) DEBUG: get_hdr_body : content_length=0 0(1464) found end of header 0(1464) DEBUG: is_maxfwd_present: max_forwards header not found! 0(1464) end of header reached, state=9 0(1464) parse_headers: flags=256 0(1464) find_first_route(): No Route headers found 0(1464) loose_route(): There is no Route HF 0(1464) parse_headers: flags=4096 0(1464) pre_auth(): Credentials with given realm not found 0(1464) build_auth_hf(): 'WWW-Authenticate: Digest realm="casinoreality.co.uk", nonce="3f305b98bc1835283fec5e1c6b584776470624c5" ' 0(1464) parse_headers: flags=-1 0(1464) check_via_address(220.240.68.206, 220.240.68.206, 0) 0(1464) receive_msg: cleaning up Here is a copy of my config # # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=7 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=~"casinoreality.co.uk") { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("casinoreality.co.uk", "subscriber")) { www_challenge("casinoreality.co.uk", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; }