24 May
2007
24 May
'07
6:25 a.m.
Your problems seems to be concerned to the RTP part of the comunication...
as SIP pointed, where should the clients send the RTP traffic? To 127.0.0.1
(Your Asterisk IP)? I don't think so... ;)
So, from what I see and understand from Your explanation, You have two
choices:
1- bind Asterisk to an external IP like SER (can be the same IP), but in
another port;
2- try to include in Your design a RTP-Proxy application (rtproxy or
mediaproxy are good choices).
Edson.
-----Original Message-----
From: serusers-bounces(a)lists.iptel.org [mailto:serusers-
bounces(a)lists.iptel.org] On Behalf Of John Breen
Sent: quinta-feira, 24 de maio de 2007 00:15
To: SIP
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] Ser + Asterisk on the same box??
SIP wrote:
Your biggest issue, bar none, is using the
loopback address for
anything externally-facing. 127.0.0.1 is called a loopback address for
a reason -- it never leaves the host itself. Just how do you expect
the SIP phones to be able to contact a 127.0.0.1 address when that
address is, in essence, themselves?
There's something inherently flawed in your design.
Let's back up and explain, in detail, what it is exactly you're trying
to do, and why you feel the 127.0.0.1 address should be part of this
equation? Perhaps we can suggest something if we know what you're
trying to do.
There's a very simple reason. Asterisk and SER are on the same
machine. So the traffic from SER to asterisk doesn't need to leave the
box. This is why I'm using the loopback interface - there's no need to
use the real world one.
--
Regards,
John Breen
HGA IT&T Solutions
Tel: 08 63113000
Fax: 08 63113144
http://www.hgait.net.au
Level 9, 256 Adelaide Terrace, Perth, WA 6000
Postal PO Box 3133 Perth, Adelaide Tce WA 6832
The information in this E-mail is confidential. If you are not the named
& intended recipient, you must not read, use, copy, disclose or disseminate
this E-mail, any attachments or the information contained in this E-mail
and
must immediately notify the sender & delete this E-mail immediately.
Although
HGA IT&T Solutions believes that this E-mail and any attachments are free
of
any virus or other defect which may affect a computer, it is the
responsibility of the recipient to ensure that it is virus free. HGA IT&T
Solutions does not accept any responsibility for any loss or damage arising
in
any way from the use of this E-mail or any attachments.
IMPORTANT INFORMATION
This is not a SPAM. The SPAM Act 2003 commenced on the 10th April 2004 and
requires consent to the sending of most commercial electronic messages. If
you wish to continue receiving electronic communications from HGA IT&T
Solutions, you do not need to take any action.
If you DO NOT wish to continue receiving electronic communications from HGA
IT&T Solutions please advise us at admin(a)hgait.net.au and we will update
our
records accordingly.
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers