On Thu, Feb 19, 2009 at 4:12 PM, Daniel-Constantin Mierla <miconda@gmail.com> wrote:


On 02/19/2009 06:06 PM, Asim Riaz wrote:



On Thu, Feb 19, 2009 at 3:53 PM, Daniel-Constantin Mierla <miconda@gmail.com <mailto:miconda@gmail.com>> wrote:

   Hello,


   On 02/19/2009 05:34 PM, Asim Riaz wrote:

       Hello,
       I am using LCR, for some reason load_gws() function is not
       finding the gateway in DB, it was working in the start then
       added some more routes and after that everything stopped
       working, I am not sure where to start troubleshooting,  any idea ?


   run kamailio with higher debug mode (e.g., debug=5) in
   configuration file.

   You should get more debug messages in the syslog, that may give
   you some hints. look for lines containing 'lcr'.

   Cheers,
   Daniel


Hi Daniel,
I tried  higher debug level, not getting anything related to LCR all i am getting XLOG messages "unable to find Gateway".

can you check if you have matching LCR rule for your call?

Cheers,
Daniel
 
 I have only one LCR route entry for now  with prefix 0 which is  matching the GW with ID 1, as mentioned below and the number I am dialing is starting from 0 so i think it should match my route entry right ?

Thanks,

Asim
 




Thanks,

Asim
 



       kamctl lcr show

       lcr routes
       +----+--------+----------+--------+----------+
       | id | prefix | from_uri | grp_id | priority |
       +----+--------+----------+--------+----------+
       |  9 | 0      |          |      1 |        1 |
       +----+--------+----------+--------+----------+
       lcr gateways
       +------------+---------------+------+------------+-----------+--------+-------+------+-------+
       | gw_name    | ip_addr       | port | uri_scheme | transport |
       grp_id | strip | tag  | flags |
       +------------+---------------+------+------------+-----------+--------+-------+------+-------+
       | XXXX           | XXXX | 5060 |          1 |         1 |             1 |     0 |      |     0 |
       +------------+---------------+------+------------+-----------+--------+-------+------+-------+



       my routing script

                if(!load_gws()) {
               xlog("L_INFO", "[ROUTE-X] Unable To Find Gateway ");
                      sl_send_reply("503", "unable to find gateway");
                      exit;
              }
       Thanks in advance.

       Asim
       ------------------------------------------------------------------------

       _______________________________________________
       Kamailio (OpenSER) - Users mailing list
       Users@lists.kamailio.org <mailto:Users@lists.kamailio.org>

       http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
       http://lists.openser-project.org/cgi-bin/mailman/listinfo/users


   --    Daniel-Constantin Mierla
   http://www.asipto.com


------------------------------------------------------------------------

_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users@lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users

--
Daniel-Constantin Mierla
http://www.asipto.com