Re: [Serusers] ser/radius

Hello, please increase the debug level to a higher value (debug=9), try again and send the logs to us. From your previous mail on the seruser list (subj: radius issue) seems that the Radius server authenticates OK the user.

}Daniel

On 11/13/2003 12:08 PM, Madan wrote:

Hi Daniel, i have posted few queries to the list but have nt got any reply..since i can see you are only one replying here..i thought to share my problem with you.

i m trying to get ser working with radius but i can nt seems to get thru.

here is my ser.cfg file...please let me know what is wrong with that..or if u need any another conf file like radius etc..do let me know

----ser.cfg------------

# # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes # (cmd line: -E) listen=202.71.135.219 /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

modparam("usrloc", "db_mode", 2) modparam("auth_radius", "radius_config","/usr/local/etc/radiusclient/radiusclient.conf") modparam("auth_radius", "service_type", 15)

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) #modparam("acc", "log_level", 1) #modparam("acc", "radius_flag", 1)

# ------------------------- request routing logic ------------------- # main routing logic

route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; };

# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };

# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it)

   if (method=="REGISTER") {

           log(1, "REGISTER: Authenticating user\n");

           if (!radius_www_authorize("")) {
                   log(1, "REGISTER: challenging user\n");
                   www_challenge("", "2");
                   break;
           };
           save("location");
           break;
   };


   if (method=="INVITE") {

           log(1, "INVITE\n");
           setflag(1); /* set for accounting (the same value as in

log_flag!) */ };

   if (method=="MESSAGE") {
           log(1, "MESSAGE\n");
           setflag(1); /* set for accounting (the same value as in

log_flag!) */ };

   if (method=="BYE" || method=="CANCEL") {
           log (1, "BYE or CANCEL\n");
           setflag(1);
   };

   # native SIP destinations are handled using our USRLOC DB
   if (!lookup("location")) {
           sl_send_reply("404", "Not Found");
           break;
   };
   if (!t_relay()) {
           sl_reply_error();
           break;
   };

}

-----------------logs---------

0(13437) mod_init(): Database connection opened successfuly acc - initializing 0(0) INFO: udp_init: SO_RCVBUF is initially 65535 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 2(13439) INFO: fifo process starting: 13439 2(13439) SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... 0(13437) REGISTER: Authenticating user 0(13437) REGISTER: challenging user 0(13437) REGISTER: Authenticating user 0(13437) REGISTER: challenging user 0(13437) REGISTER: Authenticating user 0(13437) REGISTER: challenging user

i can not get my sipua registered, please help me to get out of this

----- Original Message ----- From: "Daniel-Constantin Mierla" Daniel-Constantin.Mierla@fokus.fraunhofer.de To: "Santosh M Hulkund" santoshmh@indts.com Cc: serusers@lists.iptel.org Sent: Thursday, November 13, 2003 3:42 PM Subject: Re: [Serusers] Integrating Ser to Jabberd

...

Hello, try with this one: http://www.iptel.org/ser/doc/jabgw/xjab-manual.html

Best regards, }Daniel

On 11/13/2003 8:01 AM, Santosh M Hulkund wrote:

...

Hi Gurus,

Is there any clear document on integrating ser with jabberd.

Any pointers, greatly appreciated.

Regards, Santosh M Hulkund

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers