16 Dec
2003
16 Dec
'03
12:08 p.m.
On Mon, 15 Dec 2003, Rick Gocher wrote:
Hi,
# if
(!www_authorize("coptalk.com", "subscriber")) {
# www_challenge("coptalk.com", "0");
This is the domain you have to use. The domain that you challenge is the
domain that must be sent in your credentials. If you use sip.coptalk.com, then
you have to challenge sip.coptalk.com instead coptalk.com as you are doing
now.
At 12:45 PM 12/15/2003 +0100, Jesus Rodriguez wrote:
Saludos
JesusR.
-------------------------------
Jesus Rodriguez
VozTelecom Sistemas, S.L.
jesusr(a)voztele.com
http://www.voztele.com
Tel. 902360305
-------------------------------
On Fri, 12 Dec 2003, Rick Gocher wrote:
Hello,
Saludos
JesusR.
-------------------------------
Jesus Rodriguez
VozTelecom Sistemas, S.L.
jesusr(a)voztele.com
http://www.voztele.com
Tel. 902360305
-------------------------------
I'm not sure how to change the way the ata
sends it credentials. I have my
name Rick listed for the UID:0 and UID:1 and the password for that user. I
filled in the gateway as both an IP and FQDN with neither changing the
actual problem. I tried placing @coptalk.com and @sip.coptalk.com behind
my UID: i.e. Rick(a)sip.coptalk.com but then the ngrep reports Unauthorized.
etc. sip:Rick@sip.coptalk.com@sip.coptalk.com.... If I can't change the
ata perhaps I can change the way ser challenges?
With Cisco ATA you don't need the gateway field. You have to fill:
UID0
PWD0
GkOrProxy
UseSIP
(and others, but these are required).
For example, you have:
UID0 = Rick
PWD0 = password
GkOrProxy = sip.coptalk.com
UseSIP = 1
Then, in SER you have to set you domain as sip.coptalk.com and NOT
coptalk.com. You MUST use the same domain in SER and ATA. If you set GkOrPRoxy
in ATA as coptalk.com then SER must challenge coptalk.com.
Regards.
At 12:42 AM 12/12/2003 +0100, Jesus Rodriguez
wrote:
>On Thu, 11 Dec 2003, Rick Gocher wrote:
>
>Hello,
>
> > Just me, still trying to get authentication working... I have found by
> > placing a high debug value and starting ser I received some errors
I
never
> > saw before as I had no ata box plugged
in during the startup. I'm
not sure
> > if this points to why I can't
authenticate. When the output says
there is
> > no routing headers, is that the fault
of my ATA?
>
>I think was Jan who gave you the answer. SER is trying to challenge with
>domain sip.coptalk.com but you are sending credentials as coptalk.com
>
>
>
>
>
> > Dec 11 16:07:19 sip ser: 8(4583) SIP Request:
> > Dec 11 16:07:19 sip ser: 8(4583) method: <REGISTER>
> > Dec 11 16:07:19 sip ser: 8(4583) uri: <sip:sip.coptalk.com>
> > Dec 11 16:07:19 sip ser: 8(4583) version: <SIP/2.0>
> > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: flags=1
> > Dec 11 16:07:19 sip ser: 8(4583) end of header reached, state=5
> > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: Via found, flags=1
> > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: this is the first via
> > Dec 11 16:07:19 sip ser: 8(4583) After parse_msg...
> > Dec 11 16:07:19 sip ser: 8(4583) preparing to run routing scripts...
> > Dec 11 16:07:19 sip ser: 8(4583) entering main route 8(4583) DEBUG :
> > is_maxfwd_present: searching for max_forwards header
> > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: flags=128
> > Dec 11 16:07:19 sip ser: 8(4583) end of header reached, state=8
> > Dec 11 16:07:19 sip ser: 8(4583) DEBUG: get_hdr_field: <To> [27];
> > uri=[sip:Rick@sip.coptalk.com]
> > Dec 11 16:07:19 sip ser:
> > Dec 11 16:07:19 sip ser: ]
> > Dec 11 16:07:19 sip ser: 8(4583) get_hdr_field: cseq <CSeq>: <7>
> <REGISTER>
> > Dec 11 16:07:19 sip ser: 8(4583) DEBUG: get_hdr_body :
content_length=0
> > Dec 11 16:07:19 sip ser: 8(4583) found
end of header
> > Dec 11 16:07:19 sip ser: 8(4583) DEBUG: is_maxfwd_present:
max_forwards
> > header not found!
> > Dec 11 16:07:19 sip ser: 8(4583) DEBUG: add_param: tag=1804086518
> > Dec 11 16:07:19 sip ser: 8(4583) end of header reached, state=29
> > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: flags=256
> > Dec 11 16:07:19 sip ser: 8(4583) find_first_route(): No Route headers
> found
> > Dec 11 16:07:19 sip ser: 8(4583) loose_route(): There is no Route HF
> > Dec 11 16:07:19 sip ser: 8(4583) check_self - checking if
host==us:
16==9
> > && [sip.coptalk.com] ==
[127.0.0.1]
> > Dec 11 16:07:19 sip ser: 8(4583) check_self - checking if port 5060
> > matches port 5060
> > Dec 11 16:07:19 sip ser: 8(4583) check_self - checking if
host==us:
16==13
> > && [sip.coptalk.com] ==
[64.189.165.205]
> > Dec 11 16:07:19 sip ser: 8(4583) check_self - checking if port 5060
> > matches port 5060
> > Dec 11 16:07:19 sip ser: 8(4583) request for registration 8(4583)
> > check_nonce(): comparing [3fd907c2aa2d6c72cd666f9109e45155055b2d36] and
> > [3fd907c23a57f75133a55828041f2c9ee7b081c2]
> > Dec 11 16:07:19 sip ser: 8(4583) pre_auth(): Invalid nonce value
received,
> > very suspicious !
> > Dec 11 16:07:19 sip ser:
> > Dec 11 16:07:19 sip ser: '
> > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: flags=-1
> > Dec 11 16:07:19 sip ser: 8(4583) check_via_address(64.189.165.206,
> > 64.189.165.206, 0)
> > Dec 11 16:07:19 sip ser: 8(4583) receive_msg: cleaning up
> > Dec 11 16:07:19 sip ser: 6(4581) SIP Request:
> > Dec 11 16:07:19 sip ser: 6(4581) method: <REGISTER>
> > Dec 11 16:07:19 sip ser: 6(4581) uri: <sip:sip.coptalk.com>
> > Dec 11 16:07:19 sip ser: 6(4581) version: <SIP/2.0>
> > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: flags=1
> > Dec 11 16:07:19 sip ser: 6(4581) end of header reached, state=5
> > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: Via found, flags=1
> > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: this is the first via
> > Dec 11 16:07:19 sip ser: 6(4581) After parse_msg...
> > Dec 11 16:07:19 sip ser: 6(4581) preparing to run routing scripts...
> > Dec 11 16:07:19 sip ser: 6(4581) entering main route 6(4581) DEBUG :
> > is_maxfwd_present: searching for max_forwards header
> > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: flags=128
> > Dec 11 16:07:19 sip ser: 6(4581) end of header reached, state=8
> > Dec 11 16:07:19 sip ser: 6(4581) DEBUG: get_hdr_field: <To> [27];
> > uri=[sip:Rick@sip.coptalk.com]
> > Dec 11 16:07:19 sip ser:
> > Dec 11 16:07:19 sip ser: ]
> > Dec 11 16:07:19 sip ser: 6(4581) get_hdr_field: cseq <CSeq>: <8>
> <REGISTER>
> > Dec 11 16:07:19 sip ser: 6(4581) DEBUG: get_hdr_body :
content_length=0
> > Dec 11 16:07:19 sip ser: 6(4581) found
end of header
> > Dec 11 16:07:19 sip ser: 6(4581) DEBUG: is_maxfwd_present:
max_forwards
> > header not found!
> > Dec 11 16:07:19 sip ser: 6(4581) DEBUG: add_param: tag=1804086518
> > Dec 11 16:07:19 sip ser: 6(4581) end of header reached, state=29
> > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: flags=256
> > Dec 11 16:07:19 sip ser: 6(4581) find_first_route(): No Route headers
> found
> > Dec 11 16:07:19 sip ser: 6(4581) loose_route(): There is no Route HF
> > Dec 11 16:07:19 sip ser: 6(4581) check_self - checking if
host==us:
16==9
> > && [sip.coptalk.com] ==
[127.0.0.1]
> > Dec 11 16:07:19 sip ser: 6(4581) check_self - checking if port 5060
> > matches port 5060
> > Dec 11 16:07:19 sip ser: 6(4581) check_self - checking if
host==us:
16==13
>
&& [sip.coptalk.com] == [64.189.165.205]
> Dec 11 16:07:19 sip ser: 6(4581) check_self - checking if port 5060
> matches port 5060
> Dec 11 16:07:20 sip ser: 6(4581) request for registration 6(4581)
> check_nonce(): comparing [3fd907e3929aea9bad25fbd47b3ea062d9215574] and
> [3fd907e3929aea9bad25fbd47b3ea062d9215574]
> Dec 11 16:07:20 sip ser: 6(4581) get_ha1(): no result for user
> 'Rick(a)coptalk.com'
> Dec 11 16:07:20 sip ser:
> Dec 11 16:07:20 sip ser: '
> Dec 11 16:07:20 sip ser: 6(4581) parse_headers: flags=-1
> Dec 11 16:07:20 sip ser: 6(4581) check_via_address(64.189.165.206,
> 64.189.165.206, 0)
> Dec 11 16:07:20 sip ser: 6(4581) receive_msg: cleaning up
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
Saludos
JesusR.
-------------------------------
Jesus Rodriguez
VozTelecom Sistemas, S.L.
jesusr(a)voztele.com
http://www.voztele.com
Tel. 902360305
-------------------------------