1 Oct
2008
1 Oct
'08
10:28 a.m.
Diego,
the connector is just the translator between cdrtool and radius/openser, so
no need of coding anything inside, but use that information inside openser
to make a decision.
A good way to go would be an AVP check inside openser.cfg like:
check_value_of_ ($avp(s:credit)): (need to be replaced by real condition you
want to match)
$rU = "ann-insufficient_credit";
Cheers,
DanB
On Tue, Sep 30, 2008 at 10:38 PM, Diego Zuaneti Arruda <
diego(a)fasternet.com.br> wrote:
DanB,
The problem was solved with the new version.
I don't understand very well the python language.
It's possible to return SIP-AVP = nocredit#1 when the user have no
credits? So I can return a message to the user saying he has no credits.
Thanks again.
Diego.
----- Original Message -----
*From:* DanB <danb(a)sms4sip.com>
*To:* Diego Zuaneti Arruda <diego(a)fasternet.com.br>
*Cc:* users(a)lists.kamailio.org
*Sent:* Tuesday, September 30, 2008 3:15 PM
*Subject:* Re: [Kamailio-Users] Send MaxCallDuration and UserCredit for
freeradius-cdrtool
Hi Diego,
fixed now in pre2.
Cheers,
DanB
On Tue, Sep 30, 2008 at 5:58 PM, Diego Zuaneti Arruda <
diego(a)fasternet.com.br> wrote:
DanB,
I'm testing the freeradius-cdrtool, and found a possible problem.
When I turn off the call before answer, the session is not finished.
Here's a part of the logs:
rlm_python [freeradius-cdrtool]: Entering accounting section
rlm_python [freeradius-cdrtool]: Got the following params:
(('Acct-Status-Type', 'Failed'), ('Service-Type',
'Sip-Session'),
('Sip-Response-Code', '503'), ('Sip-Method', 'Invite'),
('X-Ascend-Bridge',
'0x694de248a0b22d087cf199b7'), ('Sip-From-Tag',
'"000d6570880e01462b3c62f9-0908d279"'), ('Acct-Session-Id',
'"
000d6570-880e0028-2a382841-1ef5c833@200.187.80.9"'<000d6570-880e0028-2a382841-1ef5c833@200.187.80.9%22%27>),
('User-Name', '"87001(a)fastervoip.com.br"'
<87001(a)fastervoip.com.br%22%27>)7>),
('Calling-Station-Id',
'"sip:87001@fastervoip.com.br<sip%3A87001@fastervoip.com.br>"'),
('Called-Station-Id',
'"sip:01591184701@fastervoip.com.br<sip%3A01591184701@fastervoip.com.br>"'),
('Sip-Translated-Request-URI',
'"sip:01591184701@200.187.80.17:5060;transport=udp"'),
('Sip-Rpid', '"87001"'), ('Source-IP',
'"200.187.80.9"'), ('Source-Port',
'"5070"'), ('Acct-Authentic', '49'),
('SIP-Proxy-IP', '"127.0.0.1"'),
('Canonical-URI',
'"sip:01591184701@fastervoip.com.br<sip%3A01591184701@fastervoip.com.br>"'),
('Billing-Party',
'"87001@fastervoip.com.br"'<87001@fastervoip.com.br%22%27>),
('Contact',
'"<sip:87001@200.187.80.9:5070;transport=udp>"'),
('NAS-Port', '5060'), ('Acct-Delay-Time', '0'),
('NAS-IP-Address', '
127.0.0.1'), ('Client-IP-Address', '127.0.0.1'),
('Acct-Unique-Session-Id', '"3db548b64d9445ce"'))
rlm_python [freeradius-cdrtool]: Extracted atribute <Acct-Status-Type>
with value <Failed>
rlm_python [freeradius-cdrtool]: Extracted atribute <User-Name> with value
<87001(a)fastervoip.com.br>
rlm_python [freeradius-cdrtool]: Extracted atribute <Canonical-URI> with
value <sip:01591184701@fastervoip.com.br<sip%3A01591184701@fastervoip.com.br>
rlm_python [freeradius-cdrtool]: Extracted
atribute <Called-Station-Id>
with value
<sip:01591184701@fastervoip.com.br<sip%3A01591184701@fastervoip.com.br>
rlm_python [freeradius-cdrtool]: Extracted
atribute <Acct-Session-Id> with
value <000d6570-880e0028-2a382841-1ef5c833(a)200.187.80.9>
*rlm_python:EXCEPT:<type 'exceptions.TypeError'>: end_session() takes
exactly 6 arguments (4 given)*
modcall[accounting]: module "python" returns ?? for request 261
modcall: leaving group accounting (returns ok) for request 261
Sending Accounting-Response of id 147 to 127.0.0.1 port 41560
Finished request 261
Diego.
----- Original Message -----
*From:* DanB <danb(a)sms4sip.com>
*To:* Diego Zuaneti Arruda <diego(a)fasternet.com.br>
*Cc:* users(a)lists.kamailio.org
*Sent:* Tuesday, September 30, 2008 11:54 AM
*Subject:* Re: [Kamailio-Users] Send MaxCallDuration and UserCredit for
freeradius-cdrtool
"The avps received will be available in openser as: callMaxDur and credit,
where callMaxDur is the maximum duration the user is allowed to be connected
with the destination and credit represents the amount of credit available at
starting of the call. This info can be used later in an bbua able to timeout
calls based on duration.
"
On Tue, Sep 30, 2008 at 4:38 PM, Diego Zuaneti Arruda <
diego(a)fasternet.com.br> wrote:
Thanks DanB, the problem was solved.
How send BYE when expires credit in conversation?
Thanks.
Diego.
----- Original Message -----
*From:* DanB <danb(a)sms4sip.com>
*To:* Diego Zuaneti Arruda <diego(a)fasternet.com.br>
*Cc:* users(a)lists.kamailio.org
*Sent:* Tuesday, September 30, 2008 11:19 AM
*Subject:* Re: [Kamailio-Users] Send MaxCallDuration and UserCredit for
freeradius-cdrtool
Here is an already patched version:
http://frad-cdrtool.sourceforge.net/rlm_digest.c
You should replace your rlm_digest.c with this one and recompile the
server.
DanB
On Tue, Sep 30, 2008 at 4:14 PM, Diego Zuaneti Arruda <
diego(a)fasternet.com.br> wrote:
I'm using the freeradius 1.1.7, and not
patched the rlm_digest.
Where to find the patch rlm_digest ?
Diego.
----- Original Message -----
*From:* DanB <danb(a)sms4sip.com>
*To:* Diego Zuaneti Arruda <diego(a)fasternet.com.br>
*Cc:* users(a)lists.kamailio.org
*Sent:* Tuesday, September 30, 2008 11:08 AM
*Subject:* Re: [Kamailio-Users] Send MaxCallDuration and UserCredit for
freeradius-cdrtool
Diego,
the problem is with your digest module which is sanitizing the
parameters in authentication phase only, therefore the parameters like
Username, Digest-URI are not available in the authorization phase (no way
for the connector to read them).
Did u patch your rlm_digest as per the README.txt? What version of
freeradius are u using?
DanB
On Tue, Sep 30, 2008 at 3:56 PM, Diego Zuaneti Arruda <
diego(a)fasternet.com.br> wrote:
> DanB,
>
> Yes, I changed the kamailio.cfg.
> I´m sending the full log of radius attached.
>
>
> Diego.
>
> ----- Original Message -----
> *From:* DanB <danb(a)sms4sip.com>
> *To:* Diego Zuaneti Arruda <diego(a)fasternet.com.br>
> *Cc:* users(a)lists.kamailio.org
> *Sent:* Tuesday, September 30, 2008 10:34 AM
> *Subject:* Re: [Kamailio-Users] Send MaxCallDuration and UserCredit
> for freeradius-cdrtool
>
> Diego,
>
> looks like there was no session started at first place.
> Did u change the openser.cfg config? You need to add callid into
> radius_proxy_authorize so that the callid should be used (example in
> README.txt of the freeradius-cdrtool sources).
>
> Also, can u post a full authorize/account_start/account_stop sequence
> as logged by "radiusd -X".
>
> DanB
> On Tue, Sep 30, 2008 at 3:00 PM, Diego Zuaneti Arruda <
> diego(a)fasternet.com.br> wrote:
>
>> Hi DanB,
>>
>> I updated the CDRTool to version 6.6.8 and freeradius-cdrtool to
>> version 1.2-pre.
>> I'm getting this log and not doing the Debit.
>>
>> Sep 30 09:57:22 sipserver1 cdrtool[12948]: DebitBalance
>> CallId=000d6570-880e0035-39c8f267-5c77e9d2(a)192.168.0.1
>> From=87001(a)mydomain.com.br
To=sip:00551599998888@mydomain.com.br<sip%3A00551599998888@mydomain.com.br>Gateway=
>> 127.0.0.1 Duration=11
>> Sep 30 09:57:22 sipserver1 cdrtool[12948]: ConnectFee=0.00 Span=1
>> Duration=60 DestId=55159 domain=mydomain.com.br Profile=551
>> Period=weekday Rate=551 Interval=0-24 Cost=0.85/60 Price=0.8500
>> Sep 30 09:57:22 sipserver1 cdrtool[12948]: Error: session
>> 000d6570-880e0035-39c8f267-5c77e9d2(a)192.168.0.1 for
>> 87001(a)mydomain.com.br does not exist
>>
>>
>> Thanks.
>> Diego.
>>
>> ----- Original Message -----
>> *From:* DanB <danb(a)sms4sip.com>
>> *To:* Diego Zuaneti Arruda <diego(a)fasternet.com.br>
>> *Cc:* users(a)lists.kamailio.org
>> *Sent:* Tuesday, September 30, 2008 5:47 AM
>> *Subject:* Re: [Kamailio-Users] Send MaxCallDuration and UserCredit
>> for freeradius-cdrtool
>>
>> Hi Diego,
>>
>> you don't need to set anything in Users file. The connector does that
>> for you dynamically, based on the responses received from cdrtool. Your
>> configuration will be static and always limit the user to the same call
>> duration. For more information, see the README file within
>> freeradius-cdrtool source directory.
>>
>> Cheers,
>> DanB
>>
>> On Mon, Sep 29, 2008 at 10:49 PM, Diego Zuaneti Arruda <
>> diego(a)fasternet.com.br> wrote:
>>
>>> Hi all,
>>>
>>> How I send to freeradius-cdrtool the maxCallDuration and
>>> UserCredit?
>>> On the /etc/raddb/users I have:
>>>
>>> 87001(a)mydomain.com.br Auth-Type := Digest, User-Password ==
>>> "mypassword"
>>> Reply-Message = "Authenticated",
>>> SIP-AVP = "authentic#1",
>>> SIP-AVP = "callMaxDur:60",
>>> SIP-AVP = "credit:25"
>>>
>>> Is this correct ?
>>>
>>>
>>>
>>> Thanks.
>>> Diego.
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)lists.kamailio.org
>>> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
>>>
>>>
>>
>