hello serusers! I have followed these instructions carefully again(http://iptel.org/ser/doc/ser_radius/ser_radius.html) and now I can see that authentication process works well but I did not see any "Accounting Report" in /var/log/radius/radacct/ or neither in radiusd -X debug, please can someone send me an example of ser.cfg configuration for this purpose?
thanks Rafael
PS: my current ser.cfg configuration is shown below, freeradius it is installed in the same host (SuSe Linux 9.0):
ser:/var/log/radius/radacct # more /etc/ser/ser.cfg # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script #
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)
#/* Uncomment these lines to enter debugging mode debug=9 fork=yes log_stderror=yes #*/
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database #loadmodule "//lib/ser/modules/mysql.so"
loadmodule "//lib/ser/modules/sl.so" loadmodule "//lib/ser/modules/tm.so" loadmodule "//lib/ser/modules/rr.so" loadmodule "//lib/ser/modules/maxfwd.so" loadmodule "//lib/ser/modules/usrloc.so" loadmodule "//lib/ser/modules/registrar.so" loadmodule "//lib/ser/modules/group_radius.so"
#loadmodule "//lib/ser/modules/group.so" # Uncomment this if you want digest authentication # mysql.so must be loaded !
loadmodule "//lib/ser/modules/auth.so"
#loadmodule "//lib/ser/modules/auth_db.so"
loadmodule "//lib/ser/modules/auth_radius.so" loadmodule "//lib/ser/modules/acc.so"
#loadmodule "//lib/ser/modules/uri.so"
# ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password")
# -- rr params -- # add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1) modparam("auth_radius","radius_config","/etc/radiusclient/radiusclient.conf") modparam("auth_radius","service_type",15) modparam("acc", "radius_config","/etc/radiusclient/radiusclient.conf") modparam("acc", "service_type", 15) modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 3)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication if (!radius_www_authorize("")) { www_challenge("", "0"); break; };
save("location"); break; };
# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };
} ser:/var/log/radius/radacct #