17 Nov
2005
17 Nov
'05
6:21 a.m.
Hi,
I get following from SEMS's log, but still announcement is not being heared
What could be the problem
----------------------------------------------
(23556) DEBUG: write_to_fifo (SerClient.cpp:252): Write to fifo: completed
(23556) DEBUG: getReturnCode (AmRequest.cpp:391): response from Ser: 200 fifo_t
reply succeeded
(23556) DEBUG: setRAddr (AmRtpStream.cpp:402): RTP remote address set to 10.111
17.16:32900
(23556) DEBUG: negotiate (AmSession.cpp:184): Sending Rtp data to 10.111.17.16/
2900
(23556) DEBUG: onSessionStart (Announcement.cpp:116): starting sending announce
..(/usr/local/lib/sems/audio/6789.wav)
(23556) DEBUG: trying to read WAV file
(23556) DEBUG: tag = <RIFF>
(23556) DEBUG: file size = <129710>
(23556) DEBUG: tag = <WAVE>
(23556) DEBUG: tag = <fmt >
(23556) DEBUG: chunk_size = <18>
(23556) DEBUG: fmt = <01>
(23556) DEBUG: channels = <1>
(23556) DEBUG: rate = <8000>
(23556) DEBUG: bits/sample = <16>
(23556) DEBUG: tag = <fact>
(23556) DEBUG: chunk size = <4>
(23556) DEBUG: tag = <data>
(23556) DEBUG: chunk size = <129660>
(23556) DEBUG: ilbc with format parameters : '', mode=30.
(23556) DEBUG: streamGet (AmAudio.cpp:548): 0-stuffing packet: adding 420 bytes
(packet size=480)
(23556) DEBUG: convert (AmAudio.cpp:246): end of stream
(23556) DEBUG: onSessionStart (Announcement.cpp:118): ... announce reaches its
nd.
(23556) DEBUG: sendRequest (AmRequest.cpp:138): dummy sendrequest
-----------------------------------------------------
Regards,
Rajesh
-----Original Message-----
From: Xavier TRENTIN [mailto:xtrentin@softiphone.net]
Sent: Tuesday, November 15, 2005 11:09 PM
To: Rajesh Rajguru (WT01 - Voice & Next Generation Networks)
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] SEMS:announcement plug in
Try to record your .wav in PCM 8Kbit/s format and configure your phone to use PCMU codec.
B.R.
xavier
rajesh.rajguru(a)wipro.com a écrit :
***********************
Pas de virus detecté dans l'attachement no filename
Votre Mail a été vérifié par InterScan.
***********-***********
Hi,
We are trying to forward INVITE to SEMS and play announcement.
It doesn't play anything.
The UA which is sending INVITE is getting time out
But the same .wav file for announcement if I open from sound recorder
manually ,then it plays.
How to check that there is problem with codec ?
Regards,
Rajesh
-----Original Message-----
From: Xavier TRENTIN [mailto:xtrentin@softiphone.net]
Sent: Monday, November 14, 2005 10:00 PM
To: Rajesh Rajguru (WT01 - Voice & Next Generation Networks)
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] SEMS:announcement plug in
Does it play nothing or does it hang off?
Perhaps the problem could be the Codec you used to record the file.
B.R.
Xavier.
rajesh.rajguru(a)wipro.com a écrit :
Confidentiality Notice
The information contained in this electronic message and any attachments to this message
are intended
for the exclusive use of the addressee(s) and may contain confidential or privileged
information. If
you are not the intended recipient, please notify the sender at Wipro or
Mailadmin(a)wipro.com immediately
and destroy all copies of this message and any attachments.
***********************
Pas de virus detecté dans l'attachement no filename
Votre Mail a été vérifié par InterScan.
***********-***********
Hi,
In our ser.cfg following is mentioned for announcement
----
if(!t_write_req("/tmp/am_fifo","announcement")) {
t_reply("500","error contacting sems");
-----
we are using fifo for communicating between ser and sems.
ser and sems are running on the same server (Fedora) When we start
sems, the default announcement file mentioned in
sems.conf
(default_announce=default_en.wav) is not played.
Also there is no error in /var/log/messages wrt announcement plug in
What could be the problem ?
How does sems decides which sound recorder to play ?
The ll /tmp/am_fifo shows following
prw-r--r-- 1 root root 0 Nov 14 09:48 /tmp/am_fifo
Regards,
Rajesh
Confidentiality Notice
The information contained in this electronic message and any
attachments to this message are intended for the
exclusive use of the
addressee(s) and may contain confidential or
privileged information.
If
you are not the intended recipient, please notify
the sender at Wipro or Mailadmin(a)wipro.com immediately and destroy all copies of this
message and any attachments.
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Confidentiality Notice
The information contained in this electronic message and any
attachments to this message are intended for the exclusive use of the
addressee(s) and may contain confidential or privileged information. If
you are not the intended recipient, please notify the sender at Wipro or
Mailadmin(a)wipro.com immediately and destroy all copies of this message and any
attachments.