Ok, I have set the minimun ST interval on the Cisco GW5300 to 60s.
But If my UA don't support "Session-Expires header", if I have a crash,
it's
the same problem, the call is not cut !
I think I need really a B2BUA solution, that's right?
Does Asterisk can be a B2BUA for billing ?
Thanks all for your help
Ragards,
Nicolas RUIZ
-----Message d'origine-----
De : Marian Dumitru [mailto:marian.dumitru@voice-sistem.ro]
Envoyé : mercredi 23 mars 2005 13:59
À : Nicolas Ruiz
Cc : 'Jiri Kuthan'; 'Java Rockx'; serusers(a)lists.iptel.org
Objet : Re: [Serusers] When the UA crash (network or power) : the call
continue!!!!
Nicolas,
AFAIK, it is not mandatory for the GW itself to implement ST. You can
have another SIP entities to do it.
Of course, a GW that support ST is an undeniable advantage; and most of
CISCO GW support this - you just have to enable it.
But you need to take care in your SER config file to process correctly
the re-INVITEs generated by the GW. Also, since many UAC implementations
does not add the "Session-Expires" header, you will need to take care
of this in your SER script.
Best regards,
Marian
Nicolas Ruiz wrote:
OK, I understand !
I have to implement ST on my GATEWAY CISCO AS5300, that's right?
Thanks a lot for your advises!
Best Regards
Nicolas RUIZ
-----Message d'origine-----
De : Jiri Kuthan [mailto:jiri@iptel.org]
Envoye : mercredi 23 mars 2005 12:31
A : Nicolas Ruiz; 'Java Rockx'
Cc : serusers(a)lists.iptel.org
Objet : RE: [Serusers] When the UA crash (network or power) : the call
continue!!!!
The *gateway* must implement the ST. The UAC does not have to.
-jiri
--
Voice System
http://www.voice-system.ro