[Serusers] Re: Serusers Digest, Vol 39, Issue 12

Date: Tue, 11 Jul 2006 08:47:40 +0200 From: "Greger V. Teigre" &lt;greger(a)teigre.com&gt; Subject: Re: [Serusers] Radius Accounting To: Caxton &lt;kaifu.chan(a)gmail.com&gt; Cc: serusers(a)lists.iptel.org, serusers-request(a)lists.iptel.org Message-ID: &lt;44B3498C.7020003(a)teigre.com&gt; Content-Type: text/plain; charset="iso-8859-1" The BYE is loose routed, thus it will go to route(1). g-) Caxton wrote: > Hi all: > > I have installed radius server, and I also configure the "ser.cfg" > for the radius accounting. However, there is a problem confues me. > > While the sip session have set up, the radiusclient send a > Request-Account packet to radius server immediately, than radius server > can save the start-up time of the session into database. But > after the session terminated, radiusclient do nothing(it should send a > Accounting-Stop packet to radius server)!! Therefore, I can > not have a complete time record. > > I try to look up the solution in seruser mailing list, but I can > not find what I want. Please help me, thanks. > > Sincerely > > Caxton > > -----ser.cfg----- > > [cut] > > # -- acc params -- > modparam("acc", "radius_config", > "/usr/local/etc/radiusclient-ng/radiusclient.conf") > modparam("acc", "log_level", 2) > modparam("acc", "radius_flag", 1) > modparam("acc", "report_ack", 0) > # ------------------------- request routing logic ------------------- > > # main routing logic > route{ > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if (msg:len >= 2048 ) { > sl_send_reply("513", "Message too big"); > break; > }; > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > if (!method=="REGISTER") record_route(); > > # subsequent messages withing a dialog should take the > # path determined by record-routing > if (loose_route()) { > # mark routing logic in request > append_hf("P-hint: rr-enforced\r\n"); > route(1); > break; > }; > > if (!uri==myself) { > # mark routing logic in request > append_hf("P-hint: outbound\r\n"); > route(1); > break; > }; > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (uri==myself) { > > if (method=="REGISTER") { > log(1, "REGISTER: Authenticating user\n"); > # Uncomment this if you want to use digest authentication > if (!www_authorize("pc80.s206.tj.mcu.edu.tw > <http://pc80.s206.tj.mcu.edu.tw/>", "subscriber")) { > log(1, "REGISTER: Chanllenging user\n"); > www_challenge(" > pc80.s206.tj.mcu.edu.tw <http://pc80.s206.tj.mcu.edu.tw/>", "0"); > break; > }; > save("location"); > break; > }; > if(method=="INVITE") { > log(1, "INVITE\n"); > setflag(1); > } > if(method=="MESSAGE") { > log(1, "MESSAGE\n"); > setflag(1); > } > if(method=="BYE"||method== "CANCEL") { > log(1, "BYE or CANCEL\n"); > setflag(1); > } > > [cut] > ------------------------------------------------------------------------ > > _______________________________________________ > Serusers mailing list > Serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers