30 Jul
2007
30 Jul
'07
9:20 a.m.
Mike O'Connor wrote:
Hi Tung
As you know Mediaproxy is written in Python, Python does not really
support proper threading as it still has a global lock on the data
dictionary.
This means that a SMP machine really does not help in fact because of
the CPU switching it will probable perform to a lower level.
Does this really cause a performance drop from 420 to 50 sessions?
regards
klaus
I would switch your machines make your test machine your production and
then buy a second machine of the same spec and use the SRV record load
balancing to give you both higher performance and redundancy.
All in all your better off having 3 or 4 machine than one machine in the
long term any :)
Cheers
Mike
Tung Tran wrote:
Hi all,
I've tested the performance of mediaproxy as below:
1/ PC1: Single P4, 2.4Ghz , 1GB memory, it can handle 420 sessions
using rtpgenerator with g729. (testing server)
2/ PC2: Dual-xeon 3Ghz, 2GB memory, but it just can handle about 50
sessions when I use rtpgenerator with g729. (production server)
Should anybody can help me to customize my production server to handle
more sessions.
Thanks and regards
Tung.
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users