I'm wondering what is best practice to configure kamailio for a setup shown below. Carriers only support interconnection over a private network so I need to terminate every separate network on kamailio machine (and on RTPEngine) . That will turn very quickly into an administration nightmare as we add more and more carriers.
My plan is to terminate carrier private networks on a router and NAT the traffic to kamailio where it leads me to a kamailio behind NAT setup. Well, in theory set_advertised_address and set_advertised_port per message can do the trick... at least I hope.
Also, some carriers require a SIP registration to activate SIP trunks. I do that using UAC module (remote registration) but here again I got a problem with contact address as you can set only one contact address (modparam("uac", "reg_contact_addr", "
10.1.1.11:5060")).
/--RTP 10000-19999-- RTPEngine1 -----RTP------+-- IPPBX1
carrier1 --- NAT ---| | |
| | |
carrier2 --- NAT ---+-----SIP 5060------ kamailio ----SIP---- Dispatcher
| | |
carrier3 --- NAT ---| | |
\--RTP 20000-29999-- RTPEngine2 -----RTP------+-- IPPBX2
So bottom line, I'm wondering what would be the best practice for such a scenario ?
That would spare me from hitting many pitfalls.
Would really appreciate a hint.
Regards,
Tihomir.