8 Oct
2020
8 Oct
'20
5:29 p.m.
Sorry for the late reply....
the dispatcher is set as follows:
# ----- dispatcher params -----
modparam("dispatcher", "list_file", DS_LIST)
modparam("dispatcher", "flags", 2)
modparam("dispatcher", "dst_avp", "$avp(AVP_DST)")
modparam("dispatcher", "grp_avp", "$avp(AVP_GRP)")
modparam("dispatcher", "cnt_avp", "$avp(AVP_CNT)")
modparam("dispatcher", "sock_avp", "$avp(AVP_SOCK)")
modparam("dispatcher", "ds_hash_size", 9)
modparam("dispatcher", "dstid_avp", "$avp(dsdstid)")
modparam("dispatcher", "ds_ping_latency_stats", 1)
I think it is correct, though what I wish is to set dispatcher on Load
Balancing mode.
This is my dispatcher.list :
1 sip:10.19.XXX.YYY:5060 0 1 duid=sipgw01;maxload=100
1 sip:10.19.XXX.YYY:5060 0 2 duid=sipgw02;maxload=100
1 sip:10.19.XXX.YYY:5060 0 3 duid=sipgw03;maxload=100
1 sip:10.19.XXX.YYY:5060 0 4 duid=sipgw04;maxload=100
This is my dispatch routes:
# Dispatch requests
route[DISPATCH] {
if(!ds_select_dst("1", "10","4"))
{
xlog("L_INFO","no destination selected from dispatcher
list!");
send_reply("404", "No destination");
exit;
}
xlog("L_INFO","going to <$ru> via <$du>\n");
t_on_failure("RTF_DISPATCH");
route(RELAY);
exit;
}
Any clue?
*Sérgio Charrua*
*www.voip.pt <http://www.voip.pt/>*
Tel.: +351 <callto:+351+91+104+12+66>21 130 71 77
Email : *sergio.charrua(a)voip.pt <sergio.charrua(a)voip.pt>*
This message and any files or documents attached are strictly confidential
or otherwise legally protected.
It is intended only for the individual or entity named. If you are not the
named addressee or have received this email in error, please inform the
sender immediately, delete it from your system and do not copy or disclose
it or its contents or use it for any purpose. Please also note that
transmission cannot be guaranteed to be secure or error-free.
On Thu, Sep 17, 2020 at 3:49 AM Arsen Semenov <arsperger(a)gmail.com> wrote:
Hi Sergio,
Make sure your dispatcher probing parameters are set correctly. (reply
codes as well).
And if it happens again you can catch OPTIONS traffic with sngrep "CSeq:
[0-9]+ OPTIONS"
and see what happens on this level.
Whether Kamailio does send pings, whether replies from gw are the same as
expected, etc.
Regards,
On Wed, Sep 16, 2020 at 5:55 PM David Villasmil <
david.villasmil.work(a)gmail.com> wrote:
Hello
I would start by looking at the logs when that happens. The gateway would
only get marked "ip" when there is no reply by the gateway or when it
replies with 500. Also OPTIONs not being replied promptly.
Maybe add some logging right before ds_mark_dst("ip").
Hope that helps,
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
On Wed, Sep 16, 2020 at 11:40 AM Sergio Charrua <sergio.charrua(a)voip.pt>
wrote:
--
Arsen Semenov
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hello,
Using Kamailio 5.1.6 for load balancing & failover,
I noticed that from time to time, and very rarely, the dispatcher module
stops dispatching to the Asterisk servers.
I have to execute a "kamcmd dispatcher reload" for it to (re)start
working.
This is my dispatcher.list :
1 sip:10.19.XXX.YYY:5060 0 1 duid=sipgw01;maxload=100
1 sip:10.19.XXX.YYY:5060 0 2 duid=sipgw02;maxload=100
1 sip:10.19.XXX.YYY:5060 0 3 duid=sipgw03;maxload=100
1 sip:10.19.XXX.YYY:5060 0 4 duid=sipgw04;maxload=100
This is my dispatch routes:
# Dispatch requests
route[DISPATCH] {
if(!ds_select_dst("1", "10","4"))
{
xlog("L_INFO","no destination selected from dispatcher
list!");
send_reply("404", "No destination");
exit;
}
xlog("L_INFO","going to <$ru> via <$du>\n");
t_on_failure("RTF_DISPATCH");
route(RELAY);
exit;
}
# Sample failure route
failure_route[RTF_DISPATCH] {
if (t_is_canceled()) {
exit;
}
xlog("L_INFO", "Media server $du failed to answer, selecting
other one!");
# next DST - only for 500 or local timeout
if ( t_check_status("500") || (t_branch_timeout() &&
!t_branch_replied()) )
{
#mark the destination Inactive and Probing
ds_mark_dst("ip");
if(ds_next_dst())
{
t_on_failure("RTF_DISPATCH");
route(RELAY);
exit;
}
}
}
I suspect that the ds_mark_dst("ip") command in RTF_DISPACTH is the
cause.
Is there any think I can improve on this? Or any know bug with the
dispatcher in Kamailio 5.1.6 version?
Thanks in advance,
*Sérgio Charrua*
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users