[Serusers] MYSQL Connection error

Hi, I am running SER and MYSQL on Solaris 8 and have the latest package of both running. Ser will run fine as standalone without any connection to MYSQL, but as soona s I try to connect it with MYSQL I get an error. I have it pasted here and after is my config file: bash-2.03# ser 0(9289) loading module /usr/local/lib/ser/modules/mysql.so 0(9289) loading module /usr/local/lib/ser/modules/sl.so 0(9289) loading module /usr/local/lib/ser/modules/tm.so 0(9289) loading module /usr/local/lib/ser/modules/rr.so 0(9289) loading module /usr/local/lib/ser/modules/maxfwd.so 0(9289) loading module /usr/local/lib/ser/modules/usrloc.so 0(9289) loading module /usr/local/lib/ser/modules/registrar.so 0(9289) loading module /usr/local/lib/ser/modules/auth.so 0(9289) loading module /usr/local/lib/ser/modules/auth_db.so 0(9289) set_mod_param_regex: usrloc matches module usrloc 0(9289) set_mod_param_regex: found <db_mode> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(9289) set_mod_param_regex: auth_db matches module auth_db 0(9289) set_mod_param_regex: found <password_column> in module auth_db [/usr/local/lib/ser/modules/auth_db.so] 0(9289) set_mod_param_regex: rr matches module rr 0(9289) set_mod_param_regex: found <enable_full_lr> in module rr [/usr/local/lib/ser/modules/rr.so] 0(9289) find_export: found <mf_process_maxfwd_header> in module maxfwd_module [/usr/local/lib/ser/modules/maxfwd.so] 0(9289) find_export: found <sl_send_reply> in module sl_module [/usr/local/lib/ser/modules/sl.so] 0(9289) parse error (79,16-23): syntax error 0(9289) parse error (79,16-23): equal/!= operator expected 0(9289) find_export: found <sl_send_reply> in module sl_module [/usr/local/lib/ser/modules/sl.so] 0(9289) find_export: found <record_route> in module rr [/usr/local/lib/ser/modules/rr.so] 0(9289) find_export: found <loose_route> in module rr [/usr/local/lib/ser/modules/rr.so] 0(9289) find_export: found <t_relay> in module tm [/usr/local/lib/ser/modules/tm.so] 0(9289) find_export: found <save> in module registrar [/usr/local/lib/ser/modules/registrar.so] 0(9289) find_export: found <lookup> in module registrar [/usr/local/lib/ser/modules/registrar.so] 0(9289) find_export: found <sl_send_reply> in module sl_module [/usr/local/lib/ser/modules/sl.so] 0(9289) find_export: found <t_relay> in module tm [/usr/local/lib/ser/modules/tm.so] 0(9289) find_export: found <sl_reply_error> in module sl_module [/usr/local/lib/ser/modules/sl.so] ERROR: bad config file (2 errors) 0(9289) DEBUG: tm_shutdown : start 0(9289) DEBUG: tm_shutdown : empting hash table 0(9289) DEBUG: tm_shutdown: releasing timers 0(9289) DEBUG: tm_shutdown : removing semaphores 0(9289) DEBUG: tm_shutdown : done 0(9289) shm_mem_destroy 0(9289) destroying the shared memory lock --------------- CONFIG FILE ---------------------------------- # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=33 # debug level (cmd line: -dddddddddd) #fork=yes log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } Best regards, Axel