Hi Users,
Today OPENSER's I st Anniversary ,
hi dedues please solve my issues
In Local network openser with radius (AAA) is working fine. by using xten softphones
But when i'm deploy in some other places with different network .
Its successfully logined , but when making the calls its gives log as ' called failed : 408 request time out..."
here is my openser,cfg below
...........................
modparam("usrloc", "db_mode", 2)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "calculate_ha1", yes)
modparam("usrloc|acc|auth_db|group|msilo", "db_url", "mysql://openser:openserrw@localhost/openser")
########333333
modparam("acc","log_level",1)
modparam("acc","log_flag",1)
modparam("acc","log_missed_flag",2)
modparam("acc", "log_fmt", "cdfimorstup")
#modparam("acc", "failed_transaction_flag",3)
modparam("acc", "report_cancels", 1)
modparam("acc","report_ack",0)
modparam("acc", "db_flag", 1)
modparam("acc", "db_missed_flag", 2)
modparam("acc","radius_flag",1)
#modparam("acc","radius_level",1)
#modparam("acc","radius_missed_flag",2)
modparam("acc","service_type",15)
#modparam("acc", "detect_direction", 1)
modparam("acc","radius_config","/usr/local/etc/radiusclient-ng/radiusclient.conf")
modparam("auth_radius","radius_config","/usr/local/etc/radiusclient-ng/radiusclient.conf")
##########33
modparam("nathelper","natping_interval",30)
modparam("nathelper","ping_nated_only",1)
modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock")
#################33
modparam("rr", "enable_full_lr", 1)
###############################################
route {
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("13")) {
sl_send_reply("483","Too Many Hops........................!");
exit;
};
if ( msg:len > max_len ) {
sl_send_reply("513", "Message too big");
exit;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
if(!method== "REGISTER")
{
record_route();
};
# loose-route processing
if (loose_route()) {
# add now 0n 9 setflag(1);
acc_rad_request("200 ok ");
t_relay();
exit;
};
# account completed transactions via syslog
#setflag(1);
# setflag(2);
if(uri==myself)
{
if(method=="REGISTER")
{
if(!radius_www_authorize("192.168.2.55"))
{
www_challenge("192.168.2.55","0");
exit;
};
#consume_credentials();
save("location");
if (m_dump())
{
log("MSILO:
offline messages dumped - if they were\n");
}else{
log("MSILO: no
offline messages dumped\n");
};
exit;
};
if(method=="INVITE" && method=="ACK")
{ record_route();
acc_rad_request("200");
force_rtp_proxy();
#setflag(1);
t_on_reply("1");
};
/* if (method=="BYE") {
record_route();
};
*/
if (method=="MESSAGE") {
log(1, "MESSAGE\n");
setflag(1); /* set for accounting (the same value as in log_flag!) */
};
if (method=="BYE" || method=="CANCEL") {
#log (1, "BYE or CANCEL\n");
#setflag(1);
acc_rad_request("200 ");
#acc_rad_request("Stop");
#unforce_rtp_proxy();
#setflag(1);
};
if(!lookup("location"))
{
sl_send_reply("404","Woo......... NOt found");
};
};
if(!t_relay())
{
sl_reply_error();
};
lookup("aliases");
#setflag(2);
exit;
}
onreply_route[1]
{
if(status=~"[0-9][0-9][0-9]")
{
force_rtp_proxy();
};
}
-----------------------------------------------------------------------------------
please help me........
--
Thanks and Regards with cheers
Sunkara Ravi Prakash (Voip Developer)
Hyperion Technology
www.hyperion-tech.com
<b>