16 Jan
2013
16 Jan
'13
11:49 a.m.
Thanks Ovidiu,
I installed the xhttp_pi module. Some information in the
modules/xhttp_pi/README, probably mixed with xhttp_rpc, should be updated.
The 'loadmodule "xhttp_rpc.so"' instruction is missing, and should
replace
the 'loadmodule "xhttp_rpc.so"' line.
This line :
modparam("xhttp_rpc", "xhttp_pi_root", "pi")
Should be changed with :
modparam("xhttp_pi", "xhttp_pi_root", "pi")
And a default value should probably be set to the 'framework' parameter,
otherwise, Kamailio will fail to start with this error :
Jan 16 10:10:42 ks3095254 /usr/local/sbin/kamailio[19278]: ERROR: xhttp_pi
[xhttp_pi.c:274]: missing framework
Thanks again,
Philippe
2013/1/9 Ovidiu Sas <osas(a)voipembedded.com>
Not all tables are supported by kamctl.
If you are looking for a simple way to provision your tables, you can
try the new provisioning module xhttp_pi:
http://kamailio.org/docs/modules/devel/modules/xhttp_pi
To enable the module in your config simply add the lines provided in
the example to your config:
http://kamailio.org/docs/modules/devel/modules/xhttp_pi#id2531339
When you compile and install the module, a sample framework will be
constructed with all the existing tables under:
/usr/local/share/kamailio/xhttp_pi/pi_framework.xml
Then you can edit the file by removing all the tables that are not
used and add new db commands/actions as you need. A full example with
all the possible commands and features can be found here:
http://git.sip-router.org/cgi-bin/gitweb.cgi?p=sip-router;a=blob;f=examples…
Or in the source tree: ./examples/pi_framework.xml
In the future, a new script will be available to generate the the
framework for tables defined in kamctlrc (same behavior as kamdbctl).
Regards,
Ovidiu Sas
--
VoIP Embedded, Inc.
http://www.voipembedded.com
On Wed, Jan 9, 2013 at 9:54 AM, Philippe Sultan
<philippe.sultan(a)gmail.com> wrote:
--
Philippe Sultan
Hi,
I'm migrating from sip-router/Kamailio 3.1, SER flavour to the latest dev
version, with MySQL support.
I need to add attributes to domains, and therefore use the domain_attrs
table. A handy command I used for that was ser_attr :
ser_attr add domain=anydomain.voip attr=value
Is there something similar I can use under the Kamailio flavour? kamctl
does
not seem to help here, unless I missed an
option.
Regards,
Philippe
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users