Re: [OpenSER-Users] OpenSER prepaid CDRTool 6.2.3 problem with replacing '+' with '00'

2. A bit dirty patch on the freeradius-cdrtool connector to replace "+" with "00" in case of calls starting with +, before querying cdrtool in auth phase. In this case you must replace also in openser + with 00 so when the call will go out, should go with 00 (to be properly reflected later in cdrs). - this is what I did and looks like running smooth.

Hi Marc,

had the same issue. The problem is that CDRTool supports only one type of international prefix (in your case any of '00' or '+', so no way of specifying two). The reason you cannot replace + with 00 before authentication is that the full digest-nonce is calculated based on a series of factors (which includes original from and to uris and replacing to_uri before sending the request to radius to be authenticated would mean that radius will never recognize the nonce to be valid anymore).

2. A bit dirty patch on the freeradius-cdrtool connector to replace "+" with "00" in case of calls starting with +, before querying cdrtool in auth phase. In this case you must replace also in openser + with 00 so when the call will go out, should go with 00 (to be properly reflected later in cdrs). - this is what I did and looks like running smooth.

Cheers, DanB

On Mon, Mar 3, 2008 at 12:46 PM, Marc LEURENT &lt;lftsy(a)leurent.eu <mailto:lftsy@leurent.eu>> wrote:

Hello I have trouble with number dialed starting with + CDRTool doesn' understand it. So I have to strip it from the request and replace it by 00! The problem is that even using this at the begenning of OpenSER script, it's not working (see CDRTool log below)

Any idea how to solve it? Thanks

# normalization to e164 if($ruri.user =~ "^\+[1-9][0-9]+") { xlog("STRIPING + For e164 NORMALIZATION \r\n"); strip(1); prefix("00"); subst('/^To:(.*)sip:\+(.*)$/To:\1sip:00\2/ig'); };

Mar 3 12:24:49 krusty CDRTool[15025]: MaxSessionTime From=mleurent(a)sip.wifirst.net <mailto:mleurent@sip.wifirst.net> To=sip:+33677832975@sip.wifirst.net <mailto:sip:+33677832975@sip.wifirst.net> Dura tion=10800 Lock=1 Mar 3 12:24:49 krusty CDRTool[15025]: Load last minute: 1 calls @ 0.00 cps, memory: 16.77 MB, uptime: 0.6 hours Mar 3 12:24:49 krusty CDRTool[15025]: Call to +33677832975(a)sip.wifirst.net <http://sip.wifirst.net>, no limit imposed Mar 3 12:24:49 krusty CDRTool[15025]: GetBalance From=mleurent(a)sip.wifirst.net <mailto:mleurent@sip.wifirst.net> Mar 3 12:24:51 krusty /usr/sbin/openser[18637]: ACC: call missed: timestamp=1204543491;method=INVITE;from_tag=xirvq;to_tag= ;call_id=cpvrqboancqnuii(a)192.168.95.139 <mailto:cpvrqboancqnuii@192.168.95.139>;code=487;reason=Request Terminated Mar 3 12:24:51 krusty CDRTool[15025]: DebitBalance From=mleurent(a)sip.wifirst.net <mailto:mleurent@sip.wifirst.net> To=sip:0033677832975@sip.wifirst.net <mailto:sip:0033677832975@sip.wifirst.net> Durat ion=0

OpenSER config extract:

# ATTENTION: DO NOT PUT ; at the end of the radius_extra attribute modparam("acc", "radius_extra", " Called-Station-Id=$tu; Calling-Station-Id=$fu; Canonical-URI=$avp(to_destination); User-Name=$avp(user_name); Billing-Party=$avp(billing_party); Sip-User-Realm=$ar; SIP-Proxy-IP=$Ri; Source-IP=$si; Source-Port=$sp; Acct-Authentic=$avp(s:authentic); From-Header=$hdr(from); User-Agent=$hdr(user-agent); Contact=$hdr(contact); Event=$hdr(event)")

# Set the acc flags xlog("JUSTE BEFORE SETTING FLAGS FOR RADIUS\r\n"); if(is_method("INVITE") && !has_totag()) { xlog("L_INFO", "I AM SETTING THE FLAGS FOR RADIUS \r\n"); # $avp(s:authentic) = 1; # $avp(can_uri) = $ru; # SIP Request's URI $avp(user_name) = $au + "@" + $ar; $avp(billing_party) = $au + "@" + $ar; $avp(to_destination) = $tu; xlog("SETTING FLAGS 1 FOR RADIUS \r\n"); setflag(1); # radius_flag xlog("SETTING FLAGS 2 FOR RADIUS \r\n"); setflag(2); # radius_missed_flag };