9 Jun
2005
9 Jun
'05
7:17 a.m.
Hi,
I believe ATA's firmware should be OK, because I have tested
successfully with external SIP server from sipphone.com (which uses SER
I think)
Steve Blair wrote:
When I used an ATA186, a long time ago, certain software releases did not
resolve SRV records. Cisco said changing one of the flag fields (I
cannot remember
which) would correct this but it never did. Anyway since my proxy was
configured
to forward calls based on the domain name and not it's own IP address or
hostname
ATAs with this problem failed to work. If I remember correctly v2.16.x code
worked fine with SRV records.
I cannot say if this is the problem you are experiencing or not but
this is all the
advice I have to offer about ATAs.
-Steve
Min ZOU wrote:
--
Best regards,
Min
Hi,
I am trying to get an ATA phone working for SER server.
Now the ATA phone can receive calls from softphone(kphone) on a PC,
while it cannot call out. (softphone, ATA phone and SER server are in
the same subnet)
$ serctl ul show 100
<sip:100@192.168.1.100:5600>;q=0.00;expires=802
Any idea on how to resolve the problem? Thanks!