18 Oct
2011
18 Oct
'11
11:28 p.m.
Henrik,
I'm having the same issue as you. Have you made any progress?
thanks.
On Mon, Oct 17, 2011 at 3:55 AM, Daniel-Constantin Mierla <miconda(a)gmail.com
wrote:
I will try to look over the sip traces you sent,
although it is tight
schedule for the 3.2.0 right now -- so it may take few days.
Cheers,
Daniel
On 10/14/11 10:07 PM, Henrik Aagaard Sørensen wrote:
Yes, pbx.my-domain.com is pointing to the IP of FreeSwitch.
sip.my-domain.com is the domain name for Kamailio.
2011/10/14 Daniel-Constantin Mierla <miconda(a)gmail.com>
On 10/14/11 7:06 PM, Henrik Aagaard Sørensen wrote:
My dispatcher.list currently just contains:
1 pbx.my-domain.com:5060
Is pbx.my-domain.com pointing to the IP address of freeswitch? What is
the domain name for kamailio ip address?
Daniel
I will provide a ngrep trace within an hour or two. Thank you so much for
helping me. I really hope to get this solved.
2011/10/14 Daniel-Constantin Mierla <miconda(a)gmail.com>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- http://www.asipto.com
Kamailio Advanced Training, Dec 5-8, Berlin:
http://asipto.com/u/kathttp://linkedin.com/in/miconda -- http://twitter.com/miconda
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hello,
On 10/14/11 4:48 PM, Henrik Aagaard Sørensen wrote:
Hi Daniel (and everyone else) again.
I've just tried to add:
loadmodule "path.so"
modparam("path", "use_received", 1)
and:
add_path_received()
just before the "if(!t_relay())..." in the ROUTE part.
That made both devices get the error "Too many loops".
what is the content of the dispatcher list file? Maybe is better to use
ds_select_domain(...) and ds_next_domain() -- cannot say it since I haven't
seen full sip trace, but maybe the problem is that freeswitch is sending
back if the r-uri address is kamailio's address.
Cheers,
Daniel
Moving the add_path_received() into the part:
if (nat_uac_test("19")) { if (method=="REGISTER") {
fix_nated_register(); add_path_received();
made the same issues as before loading the path.so module.
2011/10/14 Henrik Aagaard Sørensen <henrikaagaardsorensen(a)gmail.com>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- http://www.asipto.com
Kamailio Advanced Training, Dec 5-8, Berlin:
http://asipto.com/u/kathttp://linkedin.com/in/miconda -- http://twitter.com/miconda
Hi Daniel (and everyone else).
This is a tshark trace (is that as good as ngrep?) from Kamailio when
there are too many loops: http://pastebin.com/yRjduB0s
In this trace I got the note that 253 packets was dropped (and therefor
not in the trace).
And this is a trace when it times out: http://pastebin.com/KT0bJzEU
I've actually looked at the PATH module, and tried several things. And I
know this type of question is rather newbee-like, but can you help me out
with the PATH module and how to integrate it correctly?
I really do appreciate all the help!
2011/10/14 Daniel-Constantin Mierla <miconda(a)gmail.com>
> Hello,
>
> when using the load balancer in front of the registrar, you have to use
> PATH extensions for SIP (see path module in kamailio) in order to be able to
> cope with nat.
>
> Then, what would be helpful, will be a ngrep trace taken on kamailio
> server for failed calls.
>
> Cheers,
> Daniel
>
>
> On 10/14/11 4:13 PM, Henrik Aagaard Sørensen wrote:
>
> I've asked a lot of question about Kamailio Dispatcher in front of
> FreeSwitch in this mailing list. So I'm sorry that I'm still
"spamming", but
> it still fails.
>
> This is my status so far.
>
> When connecting 2 devices directly to FreeSwitch everything works. When
> connecting to Kamailio, some calls fails with "Timeout" and some fails
with
> "Too many loops".
>
> This is my kamailio.cfg: http://pastebin.com/KEuZmikh
>
> When connected directly to FreeSwitch where everything works, this is
> how my clients are registrered in FreeSwitch:
> http://pastebin.com/prkjkb7g
>
> When connected to Kamailio where nothing works, this is how my clients
> are registrered in FreeSwitch: http://pastebin.com/b5x6NZyv
>
> 215.197.145.132 (sip.my-domain.com) is my Kamailio.
> pbx.my-domain.com is my FreeSwitch.
> 96.224.14.164 is my IP at home, where my 2 devices are from.
>
> Can anyone help me out? I'm kinda lost at this point.
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
> --
> Daniel-Constantin Mierla -- http://www.asipto.com
> Kamailio Advanced Training, Dec 5-8, Berlin:
http://asipto.com/u/kathttp://linkedin.com/in/miconda -- http://twitter.com/miconda
>
>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- http://www.asipto.com
Kamailio Advanced Training, Dec 5-8, Berlin:
http://asipto.com/u/kathttp://linkedin.com/in/miconda -- http://twitter.com/miconda