8 Mar
2005
8 Mar
'05
2:25 p.m.
Hi all,
I've extended Juha's LCR module to support prefixes for gateways.
We use it for prefix-based setting of the bearer capability on our gateways.
Note that the attached patch is against Juha's backport for rel_0_9_0 at
http://tutpro.com/tmp/lcr-0.9.0.tgz because we've no CVS-HEAD running here.
It works as follows:
In the new table gw_cap you can define capabilities and their
corresponding prefix, like:
mysql root@ser> select * from gw_cap;
+--------+-----------+------------+----------------------+
| cap_id | cap_value | cap_prefix | cap_description |
+--------+-----------+------------+----------------------+
| 1 | 1 | | default phone trunk |
| 2 | 1 | 01 | prefixed phone trunk |
| 3 | 2 | 02 | prefixed fax trunk |
+--------+-----------+------------+----------------------+
3 rows in set (0.00 sec)
In this case the cap_value of "1" means phone-capabilites, "2" means
fax-capabilities.
The table gw_grp is extended with an additional column cap_id.
mysql root@ser> select * from gw_grp;
+--------+-------------------------+--------+
| grp_id | grp_name | cap_id |
+--------+-------------------------+--------+
| 1 | priority_1_phone | 1 |
| 2 | priority_1_phone_prefix | 2 |
| 3 | priority_1_fax_prefix | 3 |
| 4 | priority_2_phone | 1 |
| 5 | priority_2_phone_prefix | 2 |
| 6 | priority_3_phone_prefix | 2 |
+--------+-------------------------+--------+
6 rows in set (0.00 sec)
In ser.cfg you can then load the gateways for example like this if you
use different gateways/trunks for phone and fax:
if( /* phone call */)
{
if(!load_gws("1"))
{
sl_send_reply("500",
"Internal server error, unable to load phone gateways");
break;
}
}
else /* fax call */
{
if(!load_gws("2"))
{
sl_send_reply("500",
"Internal server error, unable to load fax gateways");
break;
}
}
The usage of next_gw() is as usual.
Also note that the gateway selection algorithm changes when you use
load_gws("x") instead of load_gws(): The latter always selects the
gateways with highest priority first. The new one uses the priority
value as weight, so also gateways with lower priority are chosen. Hit
ratio for 5000 rounds is as follows:
priority-1-gw-1: 35%
priority-2-gw-1: 14%
priority-2-gw-3: 14%
priority-2-gw-2: 14%
priority-2-gw-4: 14%
priority-3-gw-1: 9%
Looking forward for comments/fixes/improvements,
Andy