Re: [Serusers] a problem about module jabber

Hi everyone: I have a problem when I configure the SIP server. I add the clause "loadmodule "/usr/local/lib/ser/modules/jabber.so"" into the file "ser.cfg". And run "ser stop" or "ser start".There is a error: "ERROR: bad config file (1 errors)". Why I cannot load the module "jabber.so" and where can I find some infomation about module jabber.so? These are some informations related to my setting and problem: 1、operating system:Linux 7.0 2、SER distribution: ser-0.8.14_linux_i386.tar.gz 3、SER build: version: 0.8.14 (i386/linux) flags: STATS:Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 @(#) $Id: main.c,v 1.168.4.3 2004/06/28 15:41:21 andrei Exp $ main.c compiled on 12:28:01 Jul 27 2004 with gcc 2.95 4、SER configuration file : # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=yes log_stderror=no */ check_via=yes # (cmd. line: -v) dns=yes # (cmd. line: -r) rev_dns=yes # (cmd. line: -R) port=5060 #children=4 fifo="/tmp/ser_fifo" alias="voipv6.edu.cn" "210.25.130.252" "localhost" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/exec.so" loadmodule "/usr/local/lib/ser/modules/group.so" loadmodule "/usr/local/lib/ser/modules/msilo.so" loadmodule "/usr/local/lib/ser/modules/print.so" loadmodule "/usr/local/lib/ser/modules/textops.so" #loadmodule "/usr/local/lib/ser/modules/jabber.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/vm.so" # ----------------- setting module-specific parameters --------------- modparam("usrloc","db_url","sql://ser:heslo@localhost/ser") # -- usrloc params -- # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("voipv6.edu.cn", "subscriber")) { www_challenge("voipv6.edu.cn", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } _________________________________________________________________ 免费下载 MSN Explorer: http://explorer.msn.com/lccn _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers