17 Mar
2005
17 Mar
'05
9:45 a.m.
Thank you very much!
I'll try!
Steve
----- Original Message -----
From: "Java Rockx" <javarockx(a)gmail.com>
To: "Pavel Siderov - Hostmates" <pi(a)hostmates.com>
Cc: <serusers(a)lists.iptel.org>
Sent: Wednesday, March 16, 2005 8:16 PM
Subject: Re: [Serusers] using sipsak to send a BYE
I think you should move the line
if (method=="BYE") setflag(1);
To __before__ the loose_route() statement. It's possible that not all
BYE messages will be loose routed.
Regards,
Paul
On Wed, 16 Mar 2005 19:39:23 +0200, Pavel Siderov - Hostmates
<pi(a)hostmates.com> wrote:
Attaching my ser.cfg (with little changes - the
ips)
Regards,
Steve
----- Original Message -----
From: "Java Rockx" <javarockx(a)gmail.com>
To: "braincrew.com" <somebody(a)braincrew.com>
Cc: <serusers(a)lists.iptel.org>
Sent: Wednesday, March 16, 2005 7:11 PM
Subject: Re: [Serusers] using sipsak to send a BYE
My problems last week regarding missing BYE
messages at our PSTN GW
were due to a bug in my loose_route() logic. Basically I was doing
naughty things if loose_route() was TRUE, when I should have only been
using t_relay().
In your case I'd say make sure you have the accounting flag set when
you receive a BYE or CANCEL message. You can set this flag immediately
after your "sanity checks" at the top of the main route block.
Regards,
Paul
On Wed, 16 Mar 2005 19:07:16 +0200, braincrew.com
<somebody(a)braincrew.com> wrote:
Hi Paul,
many thanks to your replies last week about user agent expiration
(Sorry
for
not thanking you but
just working ... 24 hours these days :( ).
I'm facing the similar issue with the byes on the side of ser. My
B2BUA
sends bye to ser but bye
is not recorded in the database at about less than 10% of the calls.
You
have some idea what
maybe the case ?
Thanks in advance :),
Steve
----- Original Message -----
From: "Java Rockx" <javarockx(a)gmail.com>
To: "Iqbal" <iqbal(a)gigo.co.uk>
Cc: <serusers(a)lists.iptel.org>
Sent: Wednesday, March 16, 2005 5:12 AM
Subject: Re: [Serusers] using sipsak to send a BYE
>I have. During my debugging with a 3rd party PSTN GW provider I
> sometimes didn't send them a BYE message and they couldn't close
> their
> billing record.
>
> So I stored this in a file and used sipsak to close their billing
> record.
>
> BYE sip:5135551234@216.229.118.76:4060 SIP/2.0
> Route: <sip:216.229.127.60:5060;lr>
> From: sip:5135551234@64.152.60.6;user=phone
> To: sip:9145550000@66.243.109.99:5060;user=phone
> Contact: sip:9145550000@66.243.109.99:5060;user=phone
> CSeq: 42759 BYE
> Call-ID: 9787963-3319555348-76751(a)66.243.109.99
> User-Agent: Grandstream BT100 1.0.5.11
> Max-Forwards: 16
> Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE
> Content-Length: 0
>
> sipsak -f <filename> -s sip:<some IP address>
>
> Regards,
> Paul
>
> On Wed, 16 Mar 2005 03:07:05 GMT, Iqbal <iqbal(a)gigo.co.uk> wrote:
>>
>> Hi
>>
>> Has anyone done this successfully to hangup a call.
>>
>> Iqbal
>>
>> _______________________________________________
>> Serusers mailing list
>> serusers(a)lists.iptel.org
>> http://lists.iptel.org/mailman/listinfo/serusers
>>
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers