16 Sep
2005
16 Sep
'05
12:31 p.m.
I have attached a complete ngrep of the messages. There were no errors
in the var/log/messages file. Originally 3500 and 5000 were on the same
machine so I changed the scenario so that 3500 (Windows messenger) was
calling 2092 (BT100 - which is busy) and should be forwarded to 2009
(KPhone, same pc as SER). However it still doesn't forward the
call.....Its the last two messages confuse me...I don't understand why a
407 Proxy Authentication required would be sent back to original
caller....
My rule in the usr_preferences table of the mysql database is:
Username (2092) Attribute (fwdbusy) Value (sip:2009@serveraddress)
Any ideas?
Many thanks,
Aisling.
-----Original Message-----
From: Greger V. Teigre [mailto:greger@teigre.com]
Sent: 15 September 2005 18:43
To: Aisling; serusers(a)lists.iptel.org
Subject: Re: [Serusers] Call forwarding Question (following issue 5)
Yes, we have verified that the configs lack the append_branch you
mention.
The fix has been done (https://siprouter.onsip.org/trac/changeset/15)
and
new configs are available through the regular downloads at onsip.org.
To your other problem: No clue, Aisling. Sounds very strange indeed. The
config should only trigger proxy authentication on an INVITE (not
REGISTER).
Maybe what you are experiencing is Messenger sending a new INVITE. (It
should not, as it should receive a 100 Trying from ser). Only a
*complete*
ngrep trace will help in understanding what's happening (and any error
messages in /var/log/messages with the timestamp for matching)
g-)
Aisling wrote:
Hi,
I am testing the call forwarding features demonstrated in Issue 5 of
the
onsip getting started document. I found that blind call transfer
worked
perfectly but fwdbusy & fwdnoanswer gave me errors:
ERROR: t_forward_nonack: non branched for forwarding
ERROR: w_t_relay(failure mode): forwarding failed
ERROR: sl_reply_error used: I'm terribly sorry, server error occurred.
On the onsip site I noted that someone else had this problem and it
was
solved by putting append_branch in the fwdbusy and fwdnoanswer
sections in
the failure route.
Thankfully that fixed those errors. However when I went to test
fwdbusy
again, it doesn't give any errors but still doesn't work. The call
scenario
was as follows:
Windows Messenger client 3500 ring BT100 2092. 2092 is off the hook
(thereby
sending a 486 busy message) and the call should be forwarded to xlite
client
5000.
i.e. 3500 -> 2092(busy) -> 5000
The message sequence showed that everything was correct up to 2092
sending
the 486 busy to SER and then SER sending an ACK back to 2092. But
then SER
sends a 407 proxy authentication required to 3500 which replies with
an
ACK....and that's it...
Can someone explain why SER would send a 407 Proxy authentication to
the
original caller?...I thought this should only be in response to a
register
message?....
Any help appreciated,
Thanks,
Aisling.
-------------------Legal
Disclaimer---------------------------------------
The above electronic mail transmission is confidential and intended
only for the person to whom it is addressed. Its contents may be
protected by legal and/or professional privilege. Should it be
received by you in error please contact the sender at the above
quoted email address. Any unauthorised form of reproduction of this
message is strictly prohibited. The Institute does not guarantee the
security of any information electronically transmitted and is not
liable if the information contained in this communication is not a
proper and complete record of the message as transmitted by the
sender nor for any delay in its receipt.
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
-------------------Legal
Disclaimer---------------------------------------
The above electronic mail transmission is confidential and intended only
for the person to whom it is addressed. Its contents may be protected by
legal and/or professional privilege. Should it be received by you in
error please contact the sender at the above quoted email address. Any
unauthorised form of reproduction of this message is strictly
prohibited. The Institute does not guarantee the security of any
information electronically transmitted and is not liable if the
information contained in this communication is not a proper and complete
record of the message as transmitted by the sender nor for any delay in
its receipt.
-------------------Legal Disclaimer---------------------------------------
The above electronic mail transmission is confidential and intended only for the person to
whom it is addressed. Its contents may be protected by legal and/or professional
privilege. Should it be received by you in error please contact the sender at the above
quoted email address. Any unauthorised form of reproduction of this message is strictly
prohibited. The Institute does not guarantee the security of any information
electronically transmitted and is not liable if the information contained in this
communication is not a proper and complete record of the message as transmitted by the
sender nor for any delay in its receipt.