Re: [Serusers] SER & freeradius !

Hello, it might be possible that the condition uri=~"fptnet.vn" does not match. It is better to use uri==myself and put alias="fptnet.vn" and other hostnames you may have just below the line fifo="/tmp/ser_fifo".

If still doesnt work, watch the network (using ngrep or ethereal) and see how the SIP messages are routed. Also you can set log_stderror=yes, start ser from a console and you will be able to see lot of debug messages.

.Daniel

On 3/12/2004 4:22 AM, Anton wrote:

Hello List,

Please help me! I've installed Ser & followed the RADIUS Howto in ser website. Every thing seems to run, but radius is idle all the time, SIPPS cannot registre with SER.

Here is my ser.cfg file

What I'm wrong ? Any info is appreciated, Best regards, Anton

=============================ser.cfg file ===============

debug=7 fork=yes log_stderror=no

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"

#loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" #loadmodule "/usr/local/lib/ser/modules/uri_radius.so" #loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" #loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/xlog.so"

modparam("usrloc", "db_mode", 0) #modparam("uri_radius", "service_type", 11) modparam("rr", "enable_full_lr", 1) modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") #modparam("acc", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") #modparam("xlog", "buf_size", 8192)

### #modparam("acc", "log_level", 1) #modparam("acc", "log_flag", 1) #modparam("acc", "radius_flag", 1) modparam("tm", "fr_inv_timer", 15 ) modparam("tm", "fr_timer", 10 ) modparam("auth", "secret", "testing123") modparam("auth_radius", "service_type", 15) ###

route{

if (!mf_process_maxfwd_header("10")) {
      sl_send_reply("483","Too Many Hops");
      break;
 };

# if ( msg:len > max_len ) { # sl_send_reply("513", "Message too big"); # break; # };

 record_route();
 if (loose_route()) {
      t_relay();
      break;
 };

 if (uri=~"fptnet.vn") {
      xlog("L_ERR", " method <%rm> <%fu> <%tu>\n");
      if (method=="REGISTER") {

# if (!www_authorize("mydomain", "subscriber")) { if (!radius_www_authorize("fptnet.com.vn")) { www_challenge("fptnet.com.vn", "0"); break; };

           save("location");
           break;
      };

      setflag(1);
      if (method=="INVITE") record_route();

      if (method=="REGISTER") {
         log(1, "REGISTER received\n");
         } else {
             log(1, "non-REGISTER received\n");
         };
     if (uri=~"sip:.*[@:]fptnet.vn") {
             log(1, "request for fptnet.vn\n");
     } else {
             log(1, "request for other domain received\n");
     };

if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; #}; if (!t_relay()) { sl_reply_error(); };

}; }

---

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers