2 May
2024
2 May
'24
2:37 p.m.
Sergio Charrua wrote:
Why are you loading rtpengine module first :
rtpengine.conf
https://nickvsnetworking.com/kamailio-bytes-rtp-media-proxying-with-rtpengi
https://drive.google.com/file/d/1VQVrd8w5UicAsjl095MkwN5gNUcdjfI6/view?usp=
Hi @Sergio Charrua,
i followed the guide at this link:
https://nickvsnetworking.com/kamailio-bytes-rtp-media-proxying-with-rtpengi… i tought it
was all i need for my problem, i added the rtpengine loadmodule because i didn't see
it was present.
I can remove it and the modparam instruction for rtpengine since it's already there.
In the link above, it suggested to modify the onreply_route[MANAGE_REPLY] and the
route[RELAY] functions by adding the rtpengine_manage() call, do you think it's
wrong?
You suggested me to add a call to rtpengine_delete function on BYE|CANCEL but, where i
need to add the SIP server IP ("the advertising IP address")?
Thanks in adavnce
Christian
# loadmodule for RTPENGINE
loadmodule "rtpengine.so"
and later on do this:
#!ifdef WITH_NAT
loadmodule "nathelper.so"
#!ifdef WITH_RTPENGINE
loadmodule "rtpengine.so"
#!else
loadmodule "rtpproxy.so"
#!endif
#!endif
doesn't make much sense...
Same here, though this is more consistent with WITH_NAT check above:
#!ifdef WITH_RTPENGINE
# ----- rtpengine params -----
modparam("rtpengine", "rtpengine_sock",
"udp:127.0.0.1:2223")
#!else
# ----- rtpproxy params -----
modparam("rtpproxy", "rtpproxy_sock",
"udp:127.0.0.1:7722")
#!endif
but the following line is also unnecessary:
# RTENGINE MODULE
modparam("rtpengine", "rtpengine_sock",
"udp:localhost:2223")
On :
if (is_method("INVITE")) {
setflag(FLT_ACC); # do accounting
}
You should add in T_RELAY route (for example) a call to rtpengine_delete,
to free up RTP ports once the call is cancelled or terminated
if(is_method("BYE|CANCEL")) { #
if(check_route_param("proxy_media=yes")) {
rtpengine_delete(); xlog("L_INFO", " RTPEngine Delete from BYE|CANCEL
message in route(RELAY)!"); # } }
Add in failure_route a call to rtpengine_delete() call, to free up RTP
ports once the call is cancelled or terminated
You should also set the advertising IP address (the public IP address?? the
VPN IP address?? not sure...)
Also, the script seems too complex for your needs. Do you need REGISTER? do
you need route PRESENCE? and route LOCATION?
*Sérgio Charrua*
*www.voip.pt <http://www.voip.pt/>*
Tel.: +351 <callto:+351+91+104+12+66>91 631 11 44
Email : *sergio.charrua(a)voip.pt <sergio.charrua(a)voip.pt>*
This message and any files or documents attached are strictly confidential
or otherwise legally protected.
It is intended only for the individual or entity named. If you are not the
named addressee or have received this email in error, please inform the
sender immediately, delete it from your system and do not copy or disclose
it or its contents or use it for any purpose. Please also note that
transmission cannot be guaranteed to be secure or error-free.
On Wed, May 1, 2024 at 8:49 AM christian.marinelli--- via sr-users <
sr-users(a)lists.kamailio.org> wrote:
Sergio Charrua wrote:
<http://www.voip.pt/>*
Please share your kamailio.cfg file, if possible.
Do not forget to hide
any
> username & password that may be specified in it (i.e. db connection)
> > >
> > *Sérgio Charrua*
> > > *www.voip.pt
> Tel.: +351
<callto:+351+91+104+12+66>91 631 11 44
> > > Email : *sergio.charrua(a)voip.pt
<sergio.charrua(a)voip.pt>*
> > > This message and any files or
documents attached are strictly
confidential
> or otherwise legally protected.
> > > It is intended only for the individual
or entity named. If you are not
the
this is interesting but when i install the
named addressee or have received this email in
error, please inform the
sender immediately, delete it from your system and do not copy or
disclose
> it or its contents or use it for any purpose. Please also note that
> transmission cannot be guaranteed to be secure or error-free.
> > >
> > > > > >
> > > > > >
> > On Tue, Apr 30, 2024 at 8:47 PM christian.marinelli--- via sr-users <
> sr-users(a)lists.kamailio.org> wrote:
> > > > Benoit Panizzon wrote:
> > Hi Christian
> > > > >
>
package all
> start automatically.
> How can i disable this function (compilation for kernel module)?
> Maybe i need to install a different packege? To disalbe kernel
module usage:
> > > > >
> > > > > ###
for userspace forwarding only:
> > table = -1
> > > > > > > > Mit freundlichen Grüssen
> > > > >
-Benoît Panizzon-
> Hi
@Benoit Panizzon and @Sergio Charrua,
> i set up rtpengine on my SIP server and i configured it with the
guide you
> > suggested to me:
> > > > > >
…
> > > > >
Unfortunatly, there is no voice during the calls :)
>
This is the pcap file during the call with rtpengine configured, if
it can
> > help you:
> > > > > >
…
> > > > > To
make the test, i use two devices (two smartphone) connected to
internet
https://docs.google.com/document/d/1HH9Gn8f_31nDhvbpprwKFs535z65C995nVqels7…
> If you will need other informations, ask me without problems...
> Thank you so much
> Christian
> __________________________________________________________
> Kamailio - Users Mailing List - Non Commercial Discussions
> To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org
> Important: keep the mailing list in the recipients, do not reply only to
> the sender!
> Edit mailing list options or unsubscribe:
>
> via mobile network (not in the same LAN)
and as i can saw from the
pcap
> file, it seems they want to comunicate with
different ports from the
> standard 5060 (i opened the 5060 on my router).
> This could be the problem?
> Thanks a lot in advance
> Christian
> __________________________________________________________
> Kamailio - Users Mailing List - Non Commercial Discussions
> To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org
> Important: keep the mailing list in the recipients, do not reply only
to
> the sender!
> Edit mailing list options or unsubscribe:
> > > Hi @Sergio Charrua,
this is my kamailio.cfg configuration file:
>