28 May
2008
28 May
'08
4:25 p.m.
Hi Pete,
the Service-Type does matter only if u use it in your auth part. The reason
you see "IAPP-Register" is due to radius dictionaries, responsible for
translating between numbers and attributes (radius only transports numbers).
Regarding the problem of FreeRADIUS not authorizing the requests I think it
is a matter of which module do u want to perform that and configure that
properly. I would recomed you should running freeradius in debug mode (-X )
and post more info here.
Cheers,
DanB
On Wed, May 28, 2008 at 10:02 AM, Pete Kay <petedao(a)gmail.com> wrote:
Hi,
I am having problem with configuring FreeRadius to authenticate suername
and password. I have tried to test freeradius with a test client and it
works by sending the following message:
Ready to process requests.
User-Name = "1005(a)192.168.1.104"
User-Password = "1234"
Service-Type = Authenticate-Only
NAS-Port = 0
NAS-IP-Address = 127.0.0.1
The message that is sent by Openser is as follows:
Waking up in 1.9 seconds.
User-Name = "1005(a)192.168.1.104"
Digest-Attributes = 0x0a0631303036
Digest-Attributes = 0x010f3139322e3136382e312e313034
Digest-Attributes =
0x022a34383364376265396630623738663734363935343562386366373865303561316161623032633366
Digest-Attributes = 0x04137369703a3139322e3136382e312e313034
Digest-Attributes = 0x030a5245474953544552
Digest-Response = "eb5f24a5563e9c1096855ef8b2c72d2b"
Service-Type = IAPP-Register
X-Ascend-PW-Lifetime = 825241654
NAS-Port = 5060
NAS-IP-Address = 127.0.0.1
Freeradius can't find the password and is reject users as a result of
that. Also, is the Service-Type supposed to be Authenticate-Only instead?
Is this something to do with my openser.cfg setup that is causing the
problem?
Thanks in advance for your help.
Regards,
Pete
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users