#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
#
# simple quick-start config script
#

# ----------- global configuration parameters ------------------------

#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no	# (cmd line: -E)

/* Uncomment these lines to enter debugging mode 
debug=9
fork=yes
log_stderror=yes
*/

check_via=no	# (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
listen=192.168.0.1
children=4
fifo="/tmp/ser_fifo"
fifo_mode=0666
#alias="example.com"
# ------------------ module:wq loading ----------------------------------

# Uncomment this if you want to use SQL database
loadmodule "/usr/lib/ser/modules/mysql.so"

loadmodule "/usr/lib/ser/modules/sl.so"
loadmodule "/usr/lib/ser/modules/tm.so"
loadmodule "/usr/lib/ser/modules/acc.so"
loadmodule "/usr/lib/ser/modules/rr.so"
loadmodule "/usr/lib/ser/modules/maxfwd.so"
loadmodule "/usr/lib/ser/modules/domain.so"
loadmodule "/usr/lib/ser/modules/usrloc.so"
loadmodule "/usr/lib/ser/modules/registrar.so"
loadmodule "/usr/lib/ser/modules/msilo.so"
loadmodule "/usr/lib/ser/modules/vm.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/lib/ser/modules/auth.so"
loadmodule "/usr/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser")
modparam("usrloc", "db_mode", 1)
#modparam("usrloc", "use_domain", 1)

# --register params--
modparam("registrar", "use_domain", 1)

# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config), 
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# --domain module--
modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser")
modparam("domain", "db_mode", 1)
modparam("domain", "domain_table", "domain")
modparam("domain", "domain_col", "domain")

# --msilo params--
modparam("msilo", "registrar", "sip:registrar@example.com")
modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser")

# --vm params--
modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser")

# --acc params--
#modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser")
#modparam("acc", "db_missed_flag", 3)

# -------------------------  request routing logic -------------------

# main routing logic

route{

	# initial sanity checks -- messages with
	# max_forwards==0, or excessively long requests
	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");
		break;
	};
	if ( msg:len > max_len ) {
		sl_send_reply("513", "Message too big");
		break;
	};

	# we record-route all messages -- to make sure that
	# subsequent messages will go through our proxy; that's
	# particularly good if upstream and downstream entities
	# use different transport protocol
	record_route();	
	# loose-route processing
	if (loose_route()) {
		t_relay();
		break;
	};

	# if the request is for other domain use UsrLoc
	# (in case, it does not work, use the following command
	# with proper names and addresses in it)
	if (is_from_local()) {

		if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication
			if (!www_authorize("", "subscriber")) {
				www_challenge("", "0");
				break;
			};

			save("location");
			m_dump();
			break;
		};

		# native SIP destinations are handled using our USRLOC DB
		lookup("aliases");
		if (!lookup("location")) {

			if (method == "MESSAGE") {
       				route(2);
				break;
				};

     			if ((method=="INVITE" || method=="ACK") && t_newtran() ) {
          		t_reply("404", "Not Found");
				route(3);
			  	break;
        			};
		
		};

	setflag(3);
        # forward to current uri now; use stateful forwarding; that
        # works reliably even if we forward from TCP to UDP
        t_on_failure("1");	
	# forward to current uri now; use stateful forwarding; that
	# works reliably even if we forward from TCP to UDP
	if (!t_relay()) {
		sl_reply_error();
	};

}

route[2] {
	if (method == "MESSAGE") {
       		if (!t_newtran()) {
            		sl_reply_error();
            		break;
        	};

        	if (m_store("0")) {
            	t_reply("202", "Accepted for Later Delivery");
            	break;
        	};
       	};
}

route[3] { 

# non-Voip -- just send "off-line"
   		 if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) {
        		sl_send_reply("404", "Not Found");
        		break;
    		};
    		if (t_newtran()) {
         		t_reply("404", "Not Found");
#            		acc_db_request("404 missed call", "missed_calls");

    		};
}