10 Apr
2005
10 Apr
'05
11:37 a.m.
You have commented out auth.so and auth_db.so, then uri_db.so (which relies
on the auth module) will not start:
0(25979) DEBUG: init_mod: uri
0(25979) uri - initializing
0(25979) find_export: <db_use_table> not found
0(25979) uri:mod_init(): No database module found
0(25979) init_mod(): Error while initializing module
uri
ERROR: error while initializing modules
g-)
Kamran Ahmad wrote:
i am getting following error
-------------------------------------------------
WARNING: no fork mode and more than one listen
address found (will use only the the first one)
0(25979) DEBUG: init_mod: sl_module
stateless - initializing
0(25979) DEBUG: register_fifo_cmd: new command
(sl_stats) registered
0(25979) DEBUG: MD5 calculated:
b27e1a1d33761e85846fc98f5f3a7e58
0(25979) DEBUG: init_mod: tm
0(25979) TM - initializing...
0(25979) Call-ID initialization: '7f7bddf7'
0(25979) DEBUG: register_fifo_cmd: new command
(t_uac_dlg) registered
0(25979) DEBUG: register_fifo_cmd: new command
(t_uac_cancel) registered
0(25979) DEBUG: register_fifo_cmd: new command
(t_hash) registered
0(25979) DEBUG: lock_initialize: lock initialization
started
0(25979) DEBUG: register_fifo_cmd: new command
(t_stats) registered
0(25979) DEBUG: MD5 calculated:
533cb9e91f4b999cf76861cbb9ed54ed
0(25979) DEBUG: MD5 calculated:
a6a1c5f60faecf035a1ae5b6e96e979a
0(25979) DEBUG: init_mod: rr
0(25979) rr - initializing
0(25979) DEBUG: init_mod: maxfwd_module
Maxfwd module- initializing
0(25979) DEBUG: init_mod: usrloc
0(25979) usrloc - initializing
0(25979) DEBUG: register_fifo_cmd: new command
(ul_stats) registered
0(25979) DEBUG: register_fifo_cmd: new command
(ul_rm) registered
0(25979) DEBUG: register_fifo_cmd: new command
(ul_rm_contact) registered
0(25979) DEBUG: register_fifo_cmd: new command
(ul_dump) registered
0(25979) DEBUG: register_fifo_cmd: new command
(ul_flush) registered
0(25979) DEBUG: register_fifo_cmd: new command
(ul_add) registered
0(25979) DEBUG: register_fifo_cmd: new command
(ul_show_contact) registered
0(25979) DEBUG: init_mod: registrar
0(25979) registrar - initializing
0(25979) find_export: found <sl_send_reply> in module
sl_module [/usr/local/lib/ser/modules/sl.so]
0(25979) find_export: found <ul_bind_usrloc> in
module usrloc [/usr/local/lib/ser/modules/usrloc.so]
0(25979) find_export: found <ul_register_udomain> in
module usrloc [/usr/local/lib/ser/modules/usrloc.so]
0(25979) find_export: found <ul_get_all_ucontacts> in
module usrloc [/usr/local/lib/ser/modules/usrloc.so]
0(25979) find_export: found <ul_insert_urecord> in
module usrloc [/usr/local/lib/ser/modules/usrloc.so]
0(25979) find_export: found <ul_delete_urecord> in
module usrloc [/usr/local/lib/ser/modules/usrloc.so]
0(25979) find_export: found <ul_get_urecord> in
module usrloc [/usr/local/lib/ser/modules/usrloc.so]
0(25979) find_export: found <ul_lock_udomain> in
module usrloc [/usr/local/lib/ser/modules/usrloc.so]
0(25979) find_export: found <ul_unlock_udomain> in
module usrloc [/usr/local/lib/ser/modules/usrloc.so]
0(25979) find_export: found <ul_release_urecord> in
module usrloc [/usr/local/lib/ser/modules/usrloc.so]
0(25979) find_export: found <ul_insert_ucontact> in
module usrloc [/usr/local/lib/ser/modules/usrloc.so]
0(25979) find_export: found <ul_delete_ucontact> in
module usrloc [/usr/local/lib/ser/modules/usrloc.so]
0(25979) find_export: found <ul_get_ucontact> in
module usrloc [/usr/local/lib/ser/modules/usrloc.so]
0(25979) find_export: found <ul_update_ucontact> in
module usrloc [/usr/local/lib/ser/modules/usrloc.so]
0(25979) DEBUG: init_mod: uri
0(25979) uri - initializing
0(25979) find_export: <db_use_table> not found
0(25979) uri:mod_init(): No database module found
0(25979) init_mod(): Error while initializing module
uri
ERROR: error while initializing modules
0(25979) DEBUG: tm_shutdown : start
0(25979) DEBUG: tm_shutdown : empting DELETE list
0(25979) DEBUG: tm_shutdown : empting hash table
0(25979) DEBUG: tm_shutdown: releasing timers
0(25979) DEBUG: tm_shutdown : removing semaphores
0(25979) DEBUG: tm_shutdown : done
0(25979) shm_mem_destroy
0(25979) destroying the shared memory lock
-----------------------------------------------------
ser.cfg
-----------------------------------------------------
#debug=3
#fork=yes
#log_stderror=no
debug=7
fork=no
log_stderror=yes
dns=no
rev_dns=no
fifo="/tmp/ser_fifo"
#fifo_db_url="mysql://ser:heslo@localhost/ser"
#loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
#loadmodule "/usr/local/lib/ser/modules/auth.so"
#loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/uri.so"
loadmodule "/usr/local/lib/ser/modules/domain.so"
loadmodule "/usr/local/lib/ser/modules/nathelper.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
#loadmodule "/usr/local/lib/ser/modules/uri_db.so"
#modparam("auth_db|usrloc|uri_db", "db_url",
"mysql://ser:heslo@localhost/ser")
#modparam("auth_db", "calculate_ha1", 1)
#modparam("auth_db", "password_column", "password")
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "rtpproxy_sock",
"unix:/var/run/rtpproxy.sock")
modparam("usrloc", "db_mode", 0)
modparam("registrar", "nat_flag", 6)
modparam("rr", "enable_full_lr", 1)
route {
#
-----------------------------------------------------------------
# Sanity Check Section
#
-----------------------------------------------------------------
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483", "Too Many Hops");
break;
};
if (msg:len > max_len) {
sl_send_reply("513", "Message Overflow");
break;
};
#
-----------------------------------------------------------------
# Record Route Section
#
-----------------------------------------------------------------
if (method!="REGISTER") {
record_route();
};
if (method=="BYE" || method=="CANCEL") {
unforce_rtp_proxy();
}
#
-----------------------------------------------------------------
# Loose Route Section
#
-----------------------------------------------------------------
if (loose_route()) {
if (has_totag() && method=="INVITE") {
if (nat_uac_test("19")) {
setflag(6);
force_rport();
fix_nated_contact();
};
force_rtp_proxy("l");
};
route(1);
break;
};
#
-----------------------------------------------------------------
# Call Type Processing Section
#
-----------------------------------------------------------------
if (uri==myself) {
if (method=="INVITE") {
route(3);
break;
} else if (method=="REGISTER") {
route(2);
break;
};
if (!lookup("location")) {
sl_send_reply("404", "User Not
Found");
break;
};
route(1);
};
}
route[1] {
#
-----------------------------------------------------------------
# Default Message Handler
#
-----------------------------------------------------------------
t_on_reply("1");
if (!t_relay()) {
if (method=="INVITE" && isflagset(6)) {
unforce_rtp_proxy();
};
sl_reply_error();
};
}
route[2] {
#
-----------------------------------------------------------------
# REGISTER Message Handler
#
----------------------------------------------------------------
if (!search("^Contact: \*") &&
nat_uac_test("19")) {
setflag(6);
# fix_nated_register();
fix_nated_contact();
force_rport();
};
sl_send_reply("100", "Trying");
# if (!www_authorize("","subscriber")) {
# www_challenge("","0");
# break;
# };
if (!check_to()) {
sl_send_reply("401", "Unauthorized");
break;
};
# consume_credentials();
if (!save("location")) {
sl_reply_error();
};
}
route[3] {
#
-----------------------------------------------------------------
# INVITE Message Handler
#
-----------------------------------------------------------------
if (nat_uac_test("19")) {
setflag(6);
}
if (!lookup("location")) {
sl_send_reply("404", "User Not Found");
break;
};
# if (!proxy_authorize("","subscriber")) {
# proxy_challenge("","0");
# break;
# } else if (!check_from()) {
# if(!check_from()) {
# sl_send_reply("403", "Use From=ID");
# break;
# };
# consume_credentials();
if (isflagset(6)) {
force_rport();
fix_nated_contact();
force_rtp_proxy();
};
t_on_reply("1");
if (!t_relay()) {
if(isflagset(6)) {
unforce_rtp_proxy();
}
sl_reply_error();
};
}
onreply_route[1] {
if (isflagset(6) &&
status=~"(180)|(183)|2[0-9][0-9]") {
if (!search("^Content-Length:\ 0")) {
force_rtp_proxy();
};
} else if (nat_uac_test("1")) {
fix_nated_contact();
};
}
-----------------------------------------------------
--- "Greger V. Teigre" <greger(a)teigre.com> wrote:
------------------------------------------------------
------------------------------------------------------
=== message truncated ===
__________________________________
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/
Kamran,
There is not rtpproxy installation. Just start it...
It will communicate
through the default Unix socket. You need to make
sure that rtpproxy has
the correct version number to communicate with your
ser version.
You will find instructions in the Getting
Started document at
http://onsip.org/ as well as a ser Getting Started
source package where the
versions match.
g-)
Kamran Ahmad wrote:
------------------------------------------------------
hello
NATHelper Module is usefull in communicating through
sip.
now i am getting calles on both sides of NAT but
without voice. here is my "var/log/messages"
need help on RTP Proxy. how to install RTPProxy.
Apr 9
01:55:10 achieva ser[10869]: ERROR:
force_rtp_proxy2: support for RTP proxy is disabled
Apr 9 01:55:15 achieva ser[10870]: ERROR:
send_rtpp_command: can't connect to RTP proxy
Apr 9 01:55:15 achieva ser[10870]: WARNING:
rtpp_test: can't get version of the RTP proxy
Apr 9 01:55:15 achieva ser[10870]: WARNING:
rtpp_test: support for RTP proxyhas been disabled
temporarily
Apr 9 01:55:15 achieva ser[10870]: ERROR:
force_rtp_proxy2: support for RTP proxy is disabled
Apr 9 01:55:15 achieva ser[10870]: ERROR: on_reply
processing failed
ser.cfg
debug=3
# debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading
----------------------------------
# Uncomment this if you want to use SQL database
#loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule
"/usr/local/lib/ser/modules/registrar.so"
loadmodule
"/usr/local/lib/ser/modules/textops.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "/usr/local/lib/ser/modules/auth.so"
#loadmodule
"/usr/local/lib/ser/modules/auth_db.so"
# !! Nathelper
loadmodule
"/usr/local/lib/ser/modules/nathelper.so"
# ----------------- setting module-specific parameters
---------------
# -- usrloc params --
modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which
true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# !! Nathelper
modparam("registrar", "nat_flag", 6)
modparam("nathelper", "natping_interval", 30) # Ping
interval 30 s
modparam("nathelper", "ping_nated_only", 1) # Ping
only clients behind NAT
# ------------------------- request routing logic
-------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (msg:len >= max_len ) {
sl_send_reply("513", "Message too big");
break;
};
# !! Nathelper
# Special handling for NATed clients; first, NAT test
is
# executed: it looks for via!=received and RFC1918
addresses
# in Contact (may fail if line-folding is used);
also,
# the received test should, if completed, should
check all
# vias for rpesence of received
if (nat_uac_test("3")) {
# Allow RR-ed requests, as these may indicate that
# a NAT-enabled proxy takes care of it; unless it is
# a REGISTER
if (method == "REGISTER" || !
search("^Record-Route:")) {
log("LOG: Someone trying to register from
private IP, rewriting\n");
# This will work only for user agents that
support symmetric
# communication. We tested quite many of them
and majority is
# smart enough to be symmetric. In some phones
it takes a configuration
# option. With Cisco 7960, it is called
NAT_Enable=Yes, with kphone it is
# called "symmetric media" and "symmetric
signalling".
fix_nated_contact(); # Rewrite contact with
source IP of signalling
if (method == "INVITE") {
fix_nated_sdp("1"); # Add direction=active
to SDP
};
force_rport(); # Add rport parameter to topmost
Via
setflag(6); # Mark as NATed
};
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy;
that's
# particularly good if upstream and downstream