I have similar problems (Siemens Optipoint 400) and I'm interested in a
solution, too. I've posted to this mailing list a week ago. See below
for the messages so far.
Claus Futtrup wrote:
Hi Guys,
I have this problem with a few phones, that they can only use IP
number for
proxy adress and domain. So when they register to the proxy, the location
database will have user@ipnumber and not user@domain (use_domain, 0).
The problem is then as follows: that when a caller that registeres
with the
domain name are unable to call users that register with the domains IP
number and vice versa. lookup("location") simply replies not found.
Now I know why it happens, but is there a solution for this problem. Like
only look at user and not user@domain or user@ipnumber?
Kind Regards
Claus Futtrup
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Hi Alex,
Have you enabled "use_domain" parameter for usrloc module? If you set
it to 0 (as default) usrloc will not use the domain part to perform
usrloc lookup.
Best regards,
Marian Dumitru
Alex Mack wrote:
> Hi!
>
> I'm using ser with X-Ten Lite Soft-UA and Siemens optiPoint 400 IP
> phones. Problem is: the Siemens phones don't register themselves
> correctly.
>
> For example:
> (e.g., ser has IP 100.100.100.100)
>
> Soft-UA is "sip:30@mydomain.org"
> Phone 1 is "sip:31@mydomain.org"
> Phone 2 is "sip:32@mydomain.org"
>
> Soft-UA registers itself as "sip:30@mydomain.org"
> Phone 1 registers itself as "sip:31@100.100.100.100" (seems to be odd
> behaviour)
> Phone 2 registers itself as "sip:32@100.100.100.100"
>
> But now the lookup fails if you start dialing from the phones. If you
> dial "32" (e.g. from Phone 1), the phone generates an INVITE to
> "sip:32@mydomain.org" which can't be found in usrloc (DEBUG tells
> that) and the call fails. If you dial "30" from the same phone, the
> call comes through, because "sip:30@mydomain.org" was found in usrloc.
> I tried to mangle the uri in the REGISTER message before
> "save("location");", without effect. I've used
"replace(re, str)",
> but it didn't seem to work.
>
> Any ideas to overcome that bug of the phones?
>
> Thanks!
> Alex.
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
>
http://lists.iptel.org/mailman/listinfo/serusers
>