Re: [SR-Users] Kamailio - Separated Servers

Good news about my tests here! I found some configurations relative to Outbound proxy and I get this working. Now, I can have two outbound proxies, one registrar and one database. I can register one user in the Outbound Proxy1 and one user in Outbound Proxy 2 and place a call between these users. But now I'm facing another problem! The ACK messages are not being delivered, so the session is being dropped after a few seconds. I think that the problem is in the Contact field. Trying to investigate it now! I'm not sure about how to change the message to deliver the ACK. Did someone had this problem before? In anycase, here is the routing configuration that I'm using in my Oubound proxy: request_route { if (($Rp == MY_WS_PORT || $Rp == MY_WSS_PORT) && !(proto == WS || proto == WSS)) { xlog("L_WARN", "SIP request received on $Rp\n"); sl_send_reply("403", "Forbidden"); exit; } route(REQINIT); if (is_method("CANCEL")) { if (t_check_trans()) { route(RELAY); } exit; } route(WITHINDLG); t_check_trans(); if (is_method("REGISTER")) { remove_hf("Route"); add_path(); $du = "sip:REGISTRAR_IP:REGISTRAR_PORT"; } else { if (is_method("INVITE|SUBSCRIBE|ACK")) record_route(); if (@via[2] == "") { # From client so route to registrar... if ($rU == $null) { sl_send_reply("484", "Address Incomplete"); exit; } remove_hf("Route"); $du = "sip:REGISTRAR_IP:REGISTRAR_PORT"; } else { # From registrar so route using "Route:" headers... if (!loose_route()) { switch($rc) { case -2: sl_send_reply("403", "Forbidden"); exit; default: xlog("L_ERR", "in request_route\n"); sl_reply_error(); exit; } } t_on_failure("FAIL_OUTBOUND"); } } route(RELAY); } route[RELAY] { if (!t_relay()) { sl_reply_error(); } exit; } route[REQINIT] { if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if(!sanity_check("1511", "7")) { xlog("Malformed SIP message from $si:$sp\n"); exit; } } route[WITHINDLG] { if (has_totag()) { if (!loose_route()) { switch($rc) { case -2: sl_send_reply("403", "Forbidden"); exit; default: if (is_method("ACK")) { if ( t_check_trans() ) { record_route(); route(RELAY); exit; } else { exit; } } sl_send_reply("404","Not Found"); } } else { if (is_method("NOTIFY")) { record_route(); } route(RELAY); } exit; } } onreply_route { if (($Rp == MY_WS_PORT || $Rp == MY_WSS_PORT) && !(proto == WS || proto == WSS)) { xlog("L_WARN", "SIP response received on $Rp\n"); drop; } if (!t_check_trans()) { drop; } if ($rm == "REGISTER" && $rs >= 200 && $rs <= 299) { remove_hf("Flow-Timer"); if ($(hdr(Require)[*])=~"outbound") insert_hf("Flow-Timer: FLOW_TIMER\r\n", "Call-ID"); } } failure_route[FAIL_OUTBOUND] { if (t_branch_timeout() || !t_branch_replied()) { send_reply("430", "Flow Failed"); } } event_route[xhttp:request] { set_reply_close(); set_reply_no_connect(); if ($Rp != MY_WS_PORT #!ifdef WITH_TLS && $Rp != MY_WSS_PORT #!endif ) { xlog("L_WARN", "HTTP request received on $Rp\n"); xhttp_reply("403", "Forbidden", "", ""); exit; } xlog("L_DBG", "HTTP Request Received\n"); if ($hdr(Upgrade)=~"websocket" && $hdr(Connection)=~"Upgrade" && $rm=~"GET") { # Validate Host - make sure the client is using the correct # alias for WebSockets if ($hdr(Host) == $null || !is_myself("sip:" + $hdr(Host))) { xlog("L_WARN", "Bad host $hdr(Host)\n"); xhttp_reply("403", "Forbidden", "", ""); exit; } # Optional... validate Origin - make sure the client is from an # authorised website. For example, # # if ($hdr(Origin) != "http://communicator.MY_DOMAIN" # && $hdr(Origin) != "https://communicator.MY_DOMAIN") { # xlog("L_WARN", "Unauthorised client $hdr(Origin)\n"); # xhttp_reply("403", "Forbidden", "", ""); # exit; # } # Optional... perform HTTP authentication # ws_handle_handshake() exits (no further configuration file # processing of the request) when complete. if (ws_handle_handshake()) { # Optional... cache some information about the # successful connection exit; } } xhttp_reply("404", "Not Found", "", ""); } event_route[websocket:closed] { xlog("L_INFO", "WebSocket connection from $si:$sp has closed\n"); } Thanks again!!! *Bruno Emer* Mobile: +55 11 96540-0044 email: brunoemer(a)gmail.com <https://www.facebook.com/bruno.emer.5> <https://www.linkedin.com/profile/view?id=86461237&trk=spm_pic> <https://twitter.com/brunoemer_> <https://www.flickr.com/photos/122070309@N03/> <http://google.com/+BrunoEmer> <http://instagram.com/brunoemer_> 2014-09-22 12:40 GMT-03:00 Bruno Emer &lt;brunoemer(a)gmail.com&gt;om>: Hi, Daniel and Frank!