On Thu, Apr 25, 2013 at 3:55 PM, Daniel-Constantin Mierla <miconda@gmail.com> wrote:

Hello,

I committed a patch to add angle brackets around From/To URI for local generated requests. Here is the link to commit:

- http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=4e4b1339bfd3a832f5feeb1d2a2380c7455ec82b

No time to test it, so give it a try. If you are using 4.0 (even 3.3) should work by just cherry-picking. Let me know if works fine.

Depending on feedback will be part of 4.0.1 (out in few hours), or let to be backported for 4.0.2.

Cheers,
Daniel
On 4/25/13 2:23 PM, Uri Shacked wrote:
Hi,

As i wrote, when the BYE is "normal" not generated form dlg_timeout. srv2 that forwards it, does it OK.

The TO/From headers in my scenario are the same as the initial request in both servers (there are 2 legs for each call (incoming and outgoing), on each leg i use the same initial headers.Ii hope i was more clear now.

Thanks,

Uri

On Thu, Apr 25, 2013 at 2:50 PM, Klaus Darilion <klaus.mailinglists@pernau.at> wrote:

IMO the timeout-triggered BYE should have identical From/To headers as the initial request - otherwise it may cause issues with clients that are strict, or rely on identical headers (like in your setup).

regards
Klaus

On 25.04.2013 13:30, Uri Shacked wrote:

Hi,

Following this issue, and the issue "BYE dialog timeout bad syntax" from
Julia.

I have 2 kamailio servers. srv1 creates a dlg_timeout BYE and sends it
to srv2 that forwards the BYE to the next sip server (some other server...).

I can definitely see that the BYE that is being forward is malformed.
The TO header info is not complete (the port section for example).

When a "normal" bye is received from srv1 (not dlg_timeout) all works fine.

One thing that i do in this scenario, on srv2 i use uac_replace() on the
TO header. So, it is OK that the final destination is different (i do
translations).

I attached the BYE from both servers.

Any ideas?

Thanks,

Uri

You probably meant the To and From headers, I'm guessing. Yeah, as long
as there is no display name component, URIs in headers like that don't
have to go in <>s. The way Kamailio sends it is grammatically valid, per
RFC 3261. The user agents are at fault for not understanding it
correctly. Alex Balashov <abalashov at evaristesys.com

<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>> wrote:
>/"BYE headers"? Which headers? />//>/Uri Shacked <ushacked at
gmail.com
<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>> wrote:
/>//>>/Hi, />>//>>/I think there is a bug with the BYE that is sent to
the caller and />>/callee />>/when dialog timeout happends. />>//>>/The
BYE headers are sent with no "<" or ">". />>/So, some sip singaling
points decline the BYE. />>//>>/BR, />>/Uri
/>>//>>//>>/------------------------------------------------------------------------
/>>//>>/_______________________________________________ />>/SIP Express
Router (SER) and Kamailio (OpenSER) - sr-users mailing />/list
/>>/sr-users at lists.sip-router.org
<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
/>>/http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
/>//>/-- />/Sent from my mobile, and thus lacking in the refinement one
might />/expect from a fully-fledged keyboard. />//>/Alex Balashov -
Principal />/Evariste Systems LLC />/235 E Ponce de Leon Ave />/Suite
106 />/Decatur, GA 30030 />/United States />/Tel: +1-678-954-0670
/>/Web: http://www.evaristesys.com/, http://www.alexbalashov.com/
/>//>/_______________________________________________ />/SIP Express
Router (SER) and Kamailio (OpenSER) - sr-users mailing list />/sr-users
at lists.sip-router.org
<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
/>/http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users / --

Sent from my Nexus 10, with all the figments of autocorrect that might
imply. Alex Balashov - Principal Evariste Systems LLC 235 E Ponce de
Leon Ave Suite 106 Decatur, GA 30030 United States Tel: +1-678-954-0670
Web: http://www.evaristesys.com/, http://www.alexbalashov.com/
-------------- next part -------------- An HTML attachment was
scrubbed... URL:
<http://lists.sip-router.org/pipermail/sr-users/attachments/20130422/0c752722/attachment.html>

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list

sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda