Check whether there is configuration option "symetric signalling" (e.g. use the same port for sending requests and receiveng replies) in your OptiPoint UEa and check that to be used.
The asymetric signaling does not work when the UE is behind NAT, the port is not open for replies.
The same applies to RTP streams, you have to setup the RTP to be symetric.
Michal
On Thu, 2006-11-16 at 13:19 +0100, hiSIPatH wrote:
Hi all,
i have a ser setup (CentOS 4.4/ser 0.9.6) with several ip phones (SNOM320 and Xlite30) and every thing seems to work fine. The ser server has a public ip address 89.xxx.xxx.xxx and the ua are behind a NAT device (corporate FW).
I want now to add some OptiPoint420 SIP but was unable to get them working. That means that the registration is ok and calls to the Optipoints from other ua (xlite or Snom) work but i was unable to place a call from Optipoint to other ua.
In the trace you can notice that the INVITE is sent to ser with Src Port 38625 and Dst Port 5060. But the response from ser is sent to Src Port: 5060 (5060), Dst Port: 5060 (5060). The result is of couse ICMP Destination unreachable (Port unreachable).
I have rtp proxy and ser running on the same server and my ser.cfg looks like the one from the SER GettingStarted http://siprouter.onsip.org/doc/gettingstarted/ch08s02.html). I read the doc about "handling of NAT using RTP Proxy" but was unable to change the config to get this scenario with OptiPoint working. Has anyone managed to get OptiPoint to work with ser?
thx in advance?
No. Time Source Destination Protocol Info 14 8.907171 89.xxx.xxx.xxx 89.xxx.xxx.xxx SIP/SDP Request: INVITE sip:8001@registrar.mydomaine.com;transport=udp, with session description
Frame 14 (972 bytes on wire, 972 bytes captured) Ethernet II, Src: AminoCom_02:02:02 (00:02:02:02:02:02), Dst: AcerTech_9c:00:8d (00:00:e2:9c:00:8d) Internet Protocol, Src: 89.xxx.xxx.xxx (89.xxx.xxx.xxx), Dst: 89.xxx.xxx.xxx (89.xxx.xxx.xxx) User Datagram Protocol, Src Port: 38625 (38625), Dst Port: 5060 (5060) Session Initiation Protocol
No. Time Source Destination Protocol Info 15 8.907394 89.xxx.xxx.xxx 89.xxx.xxx.xxx SIP Status: 407 Proxy Authentication Required
Frame 15 (772 bytes on wire, 772 bytes captured) Ethernet II, Src: AcerTech_9c:00:8d (00:00:e2:9c:00:8d), Dst: AminoCom_02:02:02 (00:02:02:02:02:02) Internet Protocol, Src: 89.xxx.xxx.xxx (89.xxx.xxx.xxx), Dst: 89.xxx.xxx.xxx (89.xxx.xxx.xxx) User Datagram Protocol, Src Port: 5060 (5060), Dst Port: 5060 (5060) Session Initiation Protocol _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers