RE: [Serusers] Call Accouting

Hi

remove the setflags, from all sections Then make a log entry into that loop, and see in debig if u r getting into that loop.

In the INVITE section write setflag(1);

at the start of ur script uncomment

#modparam("acc", "log_flag", 2)

to read

modparam("acc", "log_flag", 1) <----------------- this '1' should match the number in ur setflag statement above

Iqbal

On 4/28/2005, "Leon Sun" leon.sun@keywestcommunications.com wrote:

Ipbal,

I really appreciate your kind help. Here is my cfg file. I tried different way to get records in Acc table without luck while mysql user auth works fine. Please advice.

Thank you.

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database

loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so"

loadmodule "/usr/local/lib/ser/modules/acc.so" # Uncomment this if you want digest authentication # mysql.so must be loaded !

loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters --------------- # ------------- tm parameters

modparam("tm", "fr_timer", 12) modparam("tm", "fr_inv_timer", 24)

# -- usrloc params --

#modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)

# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")

# -- acc params -- modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("acc", "early_media", 1) modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag",3) #modparam("acc", "log_fmt", "mfdiortspc") modparam("acc", "log_level",1) #modparam("acc", "log_flag", 2) ##modparam("acc", "log_missed_flag", 3)

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

# ------------------------- request routing logic -------------------

# main routing logic

route{

   # initial sanity checks -- messages with
   # max_forwards==0, or excessively long requests
   if (!mf_process_maxfwd_header("10")) {
           sl_send_reply("483","Too Many Hops");
           break;
   };
   if ( msg:len > max_len ) {
           sl_send_reply("513", "Message too big");
           break;
   };

   # we record-route all messages -- to make sure that
   # subsequent messages will go through our proxy; that's
   # particularly good if upstream and downstream entities
   # use different transport protocol
   record_route();
   # loose-route processing
   if (loose_route()) {
           t_relay();
           break;
   };
   if (method=="INVITE") {

                   setflag(1);setflag(2);setflag(3);
   };
   lookup("aliases");
   setflag(1);
   setflag(2);
   setflag(3);
   # if the request is for other domain use UsrLoc
   # (in case, it does not work, use the following command
   # with proper names and addresses in it)
   if (uri==myself) {
                   if (method=="INVITE") {
                           if (uri=~"^sip:1"|| uri=~"^sip:011")

{setflag(1);setflag(2);setflag(3); forward(165.208.155.192,5060);break; };

                   };
           if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication if (!www_authorize("sip.my.com", "subscriber")) { www_challenge("sip.my.com", "0");

                           break;
                   };

                   save("location");
                   break;
           };

           # native SIP destinations are handled using our USRLOC DB
           if (!lookup("location")) {
                   sl_send_reply("404", "Not Found");
                   break;
           };
   };
   # forward to current uri now; use stateful forwarding; that
   # works reliably even if we forward from TCP to UDP

   if (!t_relay()) {
           sl_reply_error();
   };

}