19 Nov
2004
19 Nov
'04
2:54 p.m.
Ok, that's what I was stating actually. The fact that my invite's go
below the t_on_reply, I'll paste my config update. Thanks for the info
I'll search google for Java's implementation.
---SNIP---
ser.cfg
t_on_reply("1");
if (method=="INVITE") {
log(1, "LOG: Caught INVITE \n");
if (lookup("location")) {
log (1, "LOG: Caught registered user, sending
there\n");
# NOTE forcing rtp maybe bad idea for ALL users,
this is
# a quick fix
#fix_nated_contact();
#force_rtp_proxy();
#forward(uri:host, uri:port);
t_relay();
break;
} else if (uri=~"^sip:[0-9]*@") { # ... forward to
gateways then;
forward(xxx.xxx.xxx.xxx, 5060);
log(1, "LOG: Tapping rowlf\n");
break;
};
};
if (!t_relay()) {
sl_reply_error();
};
}
# !! Nathelper
onreply_route[1] {
# NATed transaction ?
# if (isflagset(6)) {
# log(1, "transaction was sent to a NATED client -> fix
nated contact\n");
# fix_nated_contact();
# force_rtp_proxy();
# append_hf("P-hint: fixed NAT contact for
response\r\n");
# }
if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") {
log(1, "transaction was sent to a NATED client -> fix nated
contact\n");
fix_nated_contact();
force_rtp_proxy();
# otherwise, is it a transaction behind a NAT and we did not
# know at time of request processing ? (RFC1918 contacts)
} else if (nat_uac_test("1")) {
fix_nated_contact();
};
}
-----Original Message-----
From: Greger V. Teigre [mailto:greger@axxessanywhere.com]
Sent: Friday, November 19, 2004 6:21 AM
To: Matt Schulte; serusers(a)lists.iptel.org
Subject: Re: [Serusers] NATHelper + usrloc (+ rtpproxy?)
Hi Matt,
When a non-NATed incoming call to a NATed client is processed (INVITE),
you
must make sure that you have a t_on_reply("1"); before you call t_relay
(or
forward). The INVITE will not be detected as behind a NAT, but the
destination is (flag is set), and the reply will take care of the
rewrite.
In your config, it looks like you call t_relay before setting
t_on_reply("1"); further down. A forward will only forward the SIP
INVITE
to another SIP proxy for processing.
Paul (Java Rockx) just recently posted his config file with a
working
NAThelper/RTPproxy setup. I suggest you look at the call logic found
there.
His config is also easy to read with a lot of nice headers :-)
I haven't tested RTP proxy between a client behind NAT and Asterisk,
but
I believe that as long as you record-route the INVITE (as you do) and
handle
the replies properly, it should work.
g-)
Matt Schulte wrote:
Another note to this, I moved my 'forward' and
lookup statements down
below the t_onreply statement. I figured this should allow ser to see
that the client is in fact behind a NAT. It catches that now however I
see this in my debug (ser):
ser[21770]: transaction was sent to a NATED client -> fix nated
contact ser[21770]: ERROR: on_reply processing failed
Could the last error be a/the problem? Come on I know someone else has
had this problem. Please help!
NOTE: I just tested this out on Asterisk (as a client behind NAT) and
got the same results. It's simply not changing the RTP IP address..
--snippet--
onreply_route[1] {
# NATed transaction ?
if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") {
log(1, "transaction was sent to a NATED client -> fix nated
contact\n");
fix_nated_contact();
force_rtp_proxy();
# otherwise, is it a transaction behind a NAT and we did not
# know at time of request processing ? (RFC1918 contacts)
} else if (nat_uac_test("1")) {
fix_nated_contact();
};
-----Original Message-----
From: Matt Schulte
Sent: Thursday, November 18, 2004 8:09 AM
To: serusers(a)lists.iptel.org
Subject: [Serusers] NATHelper + usrloc (+ rtpproxy?)
All,
This is my first post to this list so go easy on me. :-) I'm rather
new to Ser, in fact I just installed it for the first time early in
the week. I'm working on the NAThelper module to get traversal
working, I have outbound (sip phone -> NATout -> ser) working just
peachy, RTP works in both directions hooray. The question is I'm
having problems getting RTP inbound, the ring of course goes through,
and RTP from the NAT'd side of course works fine however getting back
through the NAT (from outside) for RTP in this sense fails. Let me
explain the setup:
I'm using the registrar, NAThelper, usrloc, and of course (Portaone's)
RTPproxy modules. The current SIP phone is an SNOM
(yes yes, I
know..). The "endpoint" is Asterisk. When I do a sip debug on
Asterisk, I see the RTP request however it's coming from the NAT'd
fake address:
v=0
o=root 780961119 780961119 IN IP4 192.168.1.101
s=call
c=IN IP4 192.168.1.101
t=0 0
m=audio 10004 RTP/AVP 0
a=rtpmap:0 pcmu/8000
a=sendrecv
I have an idea of what to fix just not sure how to fix it. Obviously
we need it to goto RTPproxy, since this is "backwards" how would I get
it to recognize the correct IP?
See my config below, most of it is ripped off of the NAThelper.cfg
example. :-) Thanks all..
NOTE: All calls are destined for ${SIPDOMAIN}, in this case, the
machines hostname. This is normal and intentional :-)
# ---- SNIPPAGE ----
modparam("rr", "enable_full_lr", 1)
# !! Nathelper
modparam("registrar", "nat_flag", 6)
modparam("nathelper", "natping_interval", 30) # Ping interval 30 s
modparam("nathelper", "ping_nated_only", 1) # Ping only clients
behind NAT
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (msg:len >= max_len ) {
sl_send_reply("513", "Message too big");
break;
};
# !! Nathelper
# Special handling for NATed clients; first, NAT test is
# executed: it looks for via!=received and RFC1918 addresses
# in Contact (may fail if line-folding is used); also,
# the received test should, if completed, should check all
# vias for rpesence of received
if (nat_uac_test("3")) {
# Allow RR-ed requests, as these may indicate that
# a NAT-enabled proxy takes care of it; unless it is
# a REGISTER
log("LOG: Caught uac test 3 \n");
if (method == "REGISTER" || !
search("^Record-Route:")) {
log("LOG: Someone trying to register from private
IP, rewriting\n");
# This will work only for user agents that support
symmetric
# communication. We tested quite many of them and
majority is
# smart enough to be symmetric. In some phones it
takes a configuration
# option. With Cisco 7960, it is called
NAT_Enable=Yes, with kphone it is
# called "symmetric media" and "symmetric
signalling".
fix_nated_contact(); # Rewrite contact with source
IP of signalling
if (method == "INVITE") {
log("LOG: fix nated sdp\n");
fix_nated_sdp("1"); # Add direction=active to
SDP
};
force_rport(); # Add rport parameter to topmost
Via setflag(6); # Mark as NATed
};
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
if (!method=="REGISTER") record_route();
# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
route(1);
break;
};
if (!uri==myself) {
# mark routing logic in request
append_hf("P-hint: outbound\r\n");
route(1);
break;
};
if (uri==myself) {
if (method=="REGISTER") {
log("LOG: Caught register, registering user in
local db\n");
save("location");
break;
};
lookup("aliases");
if (!uri==myself) {
append_hf("P-hint: outbound alias\r\n");
route(1);
break;
};
log("LOG: Caught uri myself\n");
# native SIP destinations are handled using our USRLOC
DB
#if (!lookup("location")) {
# sl_send_reply("404", "Do what now");
# break;
#};
};
append_hf("P-hint: usrloc applied\r\n");
route(1);
}
route[1]
{
# !! Nathelper
if (uri=~"[@:](192\.168\.|10\.|172\.(1[6-9]|2[0-9]|3[0-1])\.)"
&& !search("^Route:")){
sl_send_reply("479", "We don't forward to private IP
addresses");
break;
};
# if client or server know to be behind a NAT, enable relay
if (isflagset(6)) {
log("LOG: Caught NAT flag 6 forcing rtp proxy\n");
force_rtp_proxy();
};
if (method=="REGISTER") {
break;
log("LOG: Caught Register down in our call routing,
breaking\n");
};
#### Below is mostly my own doing ####
if (method=="INVITE") {
log("LOG: Caught INVITE \n");
if (lookup("location")) {
log ("LOG: Caught registered invite, sending
there\n");
# NOTE forcing rtp maybe bad idea for ALL
users, this is
# a quick fix (which doesn't work anyway!)
#force_rtp_proxy();
#forward(uri:host, uri:port); #nor does this
t_relay();
break;
} else if (uri=~"^sip:[0-9]*@") { # ... forward to
asterisk;
forward(xxx.xxx.xxx.xxx, 5060);
log("LOG: Tapping rowlf\n");
break;
};
};
#### ####
t_on_reply("1");
if (!t_relay()) {
sl_reply_error();
};
}
# !! Nathelper
onreply_route[1] {
# NATed transaction ?
if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") {
fix_nated_contact();
force_rtp_proxy();
# otherwise, is it a transaction behind a NAT and we did not
# know at time of request processing ? (RFC1918 contacts)
} else if (nat_uac_test("1")) {
fix_nated_contact();
};
}
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers