I have tried with 5.0.1 from today (25th April).
Are you saying build for 26th will have some fixes?
On 25 April 2017 at 18:59, Sergey Basov sergey.v.basov@gmail.com wrote:
Actualy latest fixes to 180/183/200, ACK and memory leak was pushed to 5.0 and master branch.
So, please try with latest 5.0.1 nightly.
-- WBR Sergey Basov
25 апр. 2017 г. 8:55 PM пользователь "Pete Kelly" pkelly@gmail.com написал:
Call is with sipp but first goes through another SBC to clean up the SIP
(in case of problems with sipp via headers etc).
The traces I've done are actually with 4.4.
Will they be OK or would you prefer 5.0.1? The problem is exactly the same on both.
On 25 April 2017 at 16:25, Sergey Basov sergey.v.basov@gmail.com wrote:
Hi.
Can you send dump of the call with kamailio 5.0.1 nightly?
And does you make call using sipp?
-- WBR Sergey Basov
25 апр. 2017 г. 5:57 PM пользователь "Pete Kelly" pkelly@gmail.com написал:
Looks like from last night:
5.0.1+0~20170425013247.36+trusty
On 25 April 2017 at 15:42, Daniel-Constantin Mierla miconda@gmail.com wrote:
Hello,
to be sure, it is 5.0.1 build from last night or quite recent? There were some fixes in the past days to topos module.
Cheers, Daniel
On 25.04.17 15:59, Pete Kelly wrote:
Hi Daniel
Sorry for the delayed response to this, the ACK is for a 200OK yes and the problem still persists in latest 4.4 and the 5.0.1 nightly build.
I have all DB entries/kam logs/pcap files.
If you check the attached pcap, 192.168.70.70 and 192.168.252.70 are the same instance of Kamailio, it is being used to bridge the 2 networks.
Frame 34 shows the 200OK with lots of Record-Route etc, and frame 35 shows topos in action.
However the ACK that is relayed in Frame 38 seems to be missing all the Route information that was supplied in the 200OK, this causes the ACK to be relayed directly to the Contact, breaking the proxy chain.
Pete
On 22 February 2017 at 18:31, Daniel-Constantin Mierla < miconda@gmail.com> wrote:
Hello,
is the ACK for 200ok? Or an ack for a negative response?
Can you get a pcap for such situation with all messages related to the call?
Cheers, Daniel
On 22/02/2017 17:20, Pete Kelly wrote:
Hi
I am using the topos module when bridging 2 networks with Kamailio.
The INVITE/200OK part of the transaction is working fine (i.e. the Contact on both sides matches correctly the corresponding network).
However when the ACK is sent into Kamailio, instead of realising the next hop is myself and skipping it, Kamailio is sending the ACK directly to itself as a packet, causing the call setup to break.
Does anyone have any advice for this situation?
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - Mar 6-8 (Europe) and Mar 20-22 (USA) - www.asipto.com Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
--
Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training - May 22-24 (USA) - www.asipto.com Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users