Looks like your SIP UA does not support REFER. Check the technical details of the SIP UA or ask the vendor about.
Daniel
On 8/4/2004 7:29 AM, Andrew Mee wrote:
I have been using ctd.sh with no success. SER ver 0.8.14
./ctd.sh sip:support@192.168.2.253 test3@192.168.2.253
488 Not Acceptable Here invitation failed
my config is : # ----------- global configuration parameters ------------------------
debug=7 listen=192.168.2.253 log_stderror=yes check_via=no dns=no rev_dns=no fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/exec.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/textops.so" loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
modparam("usrloc", "db_mode", 0) modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "db_url", "sql://xxxx:xxxxx@127.0.0.1/hsver3") modparam("auth_db", "user_column", "uname") modparam("auth_db", "domain_column", "domain") modparam("auth_db", "password_column", "pass") modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len > 8092) { sl_send_reply("513", "Message too big"); break; };
if (loose_route()) { t_relay(); break; };
if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!proxy_authorize("", "users")) { proxy_challenge("", "0"); break; }; save("location"); break; } # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; };}; if (!t_relay()) { sl_reply_error(); };
}
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers