Hi,
I changed it to "debug=4" and restarted ser but
nothing changed.
Is there anything missing in my configuration ? Do I need a
seperate module for debug messages
?
Thanks,
ilker
-----Original Message-----
From: Vaclav
Kubart [mailto:vaclav.kubart@iptel.org]
Sent:
Tuesday, May 02, 2006 12:15 PM
To: İlker Aktuna (Koç.net)
Cc:
serusers@lists.iptel.org
Subject: Re: [Serusers] IM and presence
problems
Hi,
debug=4 should be enough. And if you restart ser with
this debug level, there should be really lots of messages in the log.
If
you have another proxy doing NAT it is probably not needed to do it on presence
server (and if oter messages work like
MESSAGE).
Vaclav
On Tue,
May 02, 2006 at 11:39:01AM +0300, ?lker Aktuna (Koç.net) wrote:
>
Hi,
>
> Which level of debug should I use ?
> debug= ?
(I tried debug=7 but nothing changed)
>
> Btw, my clients are behind
NAT. But I already forward them to an RTP+SIP proxy for voice communication. And
there is no rpoblem with voice.
> Should I use any nathelper configuration
for presence messages ?
>
> Thanks,
> ilker
>
>
-----Original Message-----
> From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org]
>
Sent: Tuesday, May 02, 2006 11:23 AM
> To: ?lker Aktuna (Koç.net)
>
Cc: serusers@lists.iptel.org
> Subject: Re: [Serusers] IM and presence
problems
>
> I think, that this problem is not caused by absence of
unixsock or unconfigured fifo module.
>
> Have you restarted ser
after changing debug level (debug=xxx in cfg)?
> There should be lots of
messages.
>
>
Vaclav
>
> On Tue, May 02, 2006 at 10:49:22AM +0300, ?lker Aktuna
(Koç.net) wrote:
> > Hi,
> >
> > Do you think that I
need unixsock module ?
> > Also, do I need any configuration for
fifo module ?
> >
> > I'm now using the CVS version and with
full configuration in the presence handbook.
> > Everything seems to
work except presence messages.
> >
> > After increasing the
loglevel to 7 there is no more information in the log.
> > Only these
lines:
> >
> > May 2 10:56:49 sesapp
/root/ser/sbin/ser[18655]: t_uac: no socket
> > found May 2
10:56:49 sesapp /root/ser/sbin/ser[18655]: ERROR:
> > notify.c:398:
Can't send watcherinfo notification (-7) May 2
> > 10:56:49
sesapp /root/ser/sbin/ser[18655]: send_winfo_notify
> > returned -7
May 2
> > 10:56:49 sesapp /root/ser/sbin/ser[18649]: t_uac: no
socket found
> > May
> > 2 10:56:49 sesapp
/root/ser/sbin/ser[18655]: t_uac: no socket found
> >
> > If
it would help , I can send you my full configuration.
> > I need help
desperately.
> >
> > Regards,
> > ilker
>
>
> > -----Original Message-----
> > From: Vaclav Kubart
[mailto:vaclav.kubart@iptel.org]
>
> Sent: Tuesday, May 02, 2006 10:09 AM
> > To: ?lker Aktuna
(Koç.net)
> > Cc: serusers@lists.iptel.org
> > Subject: Re:
[Serusers] IM and presence problems
> >
> > Hi,
> >
as I can see from the dump - MESSAGEs go through without problems,
right?
> > Try to increase debug level in config file, might be, you
will see more.
> > I don't see any problems... :-(
> >
>
> Vaclav
> >
>
> On Fri, Apr 28, 2006 at 03:32:24PM +0300, ?lker Aktuna (Koç.net)
wrote:
> > > Hi Vaclav,
> > >
> > > I've
installed ngrep and sending you ngrep output.
> > >
> >
> "t_uac: no socket found" error is occuring in nearly all of the
events.
> > > Should I use unixsock module ? If yes, what are the
needed parameters ?
> > > Currently fifo module is loaded. Should I
use it also ?
> > >
> > > For problem 2 ; you are right.
I am using Eyebeam. Then I'll ignore this error.
> > >
> >
> Thanks for your help.
> > >
> > >
ilker
