The REGISTER request contains the "pre-loaded route set". Pre-loaded route sets are for security reasons disabled in the default config (to-tag check):
if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { ... route(RELAY); } else { ...
Either remove the totag check or add an explicit entry (eg. before the above block):
if (is_method("REGISTER") { # allow pre-loaded route set for REGISTER if (loose_route()) { ... route(RELAY); } }
regards Klaus
Am 02.09.2010 17:05, schrieb Siddhardha Garige:
Hello all,
I am having little trouble routing registrations based on route header in following configuration. UA sends registration to P1 and P1 is ignoring “route header” and forwards registration request to Registrar.
I am using default kamailio configuration. Is there any thing I need to add to default config to enable route headers?
UA----------------->proxy1(kamailio)------------------->proxy2------------------>Registrar
REGISTER sip:Registrar.com SIP/2.0
Via: SIP/2.0/UDP 10.18.0.67:5060;branch=z9hG4bKd209323e;rport
Route: sip:proxy2.com;lr
Max-Forwards: 70
From: sip:xxxxxx@registrar.com;tag=a85f9424
Contact: sip:xxxxxxx@10.18.0.67
Call-ID: 431368ae25a3e232
CSeq: 100 REGISTER
Expires: 840
Allow: INVITE,ACK,BYE,CANCEL,OPTIONS,UPDATE,SUBSCRIBE,NOTIFY
Supported:
User-Agent: xg-tx60 3.1.17 (VeriCall Edge)
Content-Length: 0
Thanks
Sid
"May the light be with you." ______________________________________________ Siddhardha Garige www.luminepixels.com http://www.luminepixels.com/
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users