[OpenSER-Users] Why (uri!=mysqlf) even though I see correct uri

Hello everybody, I am having a problem while REGISTERing to openser. I have understood that in my case even though REGISTER method is sent always uri != myself, which is why register is not honored can anyone point me the reason behind it. Anybody please give me some advices? Thank you very much!!! Alex Here is snippet of openser.cfg where I am logging inside (!uri==myself) ++++++++++++++++++++++++++++++++++++++++++++++++ if (!uri==myself) /* replace with following line if multi-domain support is used */ ##if (!is_uri_host_local()) { xlog("L_INFO", "request method URI not matched: [$rm], from URI: [$fu], To URI: [$tu]"); append_hf("P-hint: outbound\r\n"); route(1); } ++++++++++++++++++++++++++++++++++++++++++++++++ Here is my complete openser.cfg # $Id: openser.cfg 4083 2008-04-24 19:26:11Z miconda $ debug=3 log_stderror=no log_facility=LOG_LOCAL0 fork=yes children=4 port=5060 ####### Modules Section ######## #set module path mpath="/usr/local/lib64/openser/modules/" /* uncomment next line for MySQL DB support */ loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" loadmodule "uri_db.so" loadmodule "uri.so" loadmodule "xlog.so" loadmodule "acc.so" /* uncomment next lines for MySQL based authentication support NOTE: a DB (like mysql) module must be also loaded */ loadmodule "auth.so" loadmodule "auth_db.so" /* uncomment next line for aliases support NOTE: a DB (like mysql) module must be also loaded */ loadmodule "alias_db.so" /* uncomment next line for multi-domain support NOTE: a DB (like mysql) module must be also loaded NOTE: be sure and enable multi-domain support in all used modules (see "multi-module params" section ) */ #loadmodule "domain.so" /* uncomment the next two lines for presence server support NOTE: a DB (like mysql) module must be also loaded */ #loadmodule "presence.so" #loadmodule "presence_xml.so" # ----------------- setting module-specific parameters --------------- # ----- mi_fifo params ----- modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") # ----- rr params ----- # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0) # ----- rr params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10) # ----- uri_db params ----- /* by default we disable the DB support in the module as we do not need it in this configuration */ modparam("uri_db", "use_uri_table", 0) modparam("uri_db", "db_url", "") # ----- acc params ----- /* what sepcial events should be accounted ? */ modparam("acc", "early_media", 1) modparam("acc", "report_ack", 1) modparam("acc", "report_cancels", 1) /* by default ww do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "failed_transaction_flag", 3) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 2) /* uncomment the following lines to enable DB accounting also */ modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 2) # ----- usrloc params ----- #modparam("usrloc", "db_mode", 0) /* uncomment the following lines if you want to enable DB persistency for location entries */ modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "mysql://openser:openserrw@localhost/openser") # ----- auth_db params ----- /* uncomment the following lines if you want to enable the DB based authentication */ modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("auth_db", "load_credentials", "") ####### Routing Logic ######## # main request routing logic route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { setflag(1); # do accouting ... setflag(3); # ... even if the transaction fails } route(1); } else { /* uncomment the following lines if you want to enable presence */ ##if (is_method("SUBSCRIBE") && $rd == "your.server.ip.address") { ## # in-dialog subscribe requests ## route(2); ## exit; ##} if ( is_method("ACK") ) { if ( t_check_trans() ) { # non loose-route, but stateful ACK; must be an ACK after a 487 or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction ... ignore and discard.\n"); exit; } } sl_send_reply("404","Not here"); } exit; } #initial requests # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; } t_check_trans(); # record routing if (!is_method("REGISTER|MESSAGE")) record_route(); # account only INVITEs if (is_method("INVITE")) { setflag(1); # do accouting } ### Added to hit this Asterisk system itself (nxxtcom2) if (!uri==myself) /* replace with following line if multi-domain support is used */ ##if (!is_uri_host_local()) { xlog("L_INFO", "request method URI not matched: [$rm], from URI: [$fu], To URI: [$tu]"); append_hf("P-hint: outbound\r\n"); route(1); } xlog("L_INFO", "request method: [$rm], from URI: [$fu], To URI: [$tu]"); # requests for my domain /* uncomment this if you want to enable presence server and comment the next 'if' block NOTE: uncomment also the definition of route[2] from below */ ##if( is_method("PUBLISH|SUBSCRIBE")) ## route(2); if (is_method("PUBLISH")) { sl_send_reply("503", "Service Unavailable"); exit; } if (is_method("REGISTER")) { xlog("L_INFO", "In Register method: [$rm], from URI: [$fu], To URI: [$tu]"); # authenticate the REGISTER requests (uncomment to enable auth) if (!www_authorize("nxxtcom1.kanobe.net", "subscriber")) { xlog("L_INFO", "In authorize section: [$rm], from URI: [$fu], To URI: [$tu]"); www_challenge("nxxtcom1.kanobe.net", "0"); exit; } ## ##if (!check_to()) ##{ ## sl_send_reply("403","Forbidden auth ID"); ## exit; ##} if (!save("location")) sl_reply_error(); exit; } if ($rU==NULL) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } # apply DB based aliases (uncomment to enable) ##alias_db_lookup("dbaliases"); if (!lookup("location")) { switch ($retcode) { case -1: case -3: t_newtran(); t_reply("404", "Not Found"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } } # when routing via usrloc, log the missed calls also setflag(2); route(1); } route[1] { # for INVITEs enable some additional helper routes ## if (is_method("INVITE")) { ## t_on_branch("2"); ## t_on_reply("2"); ## t_on_failure("1"); ## } if (!t_relay()) { sl_reply_error(); }; exit; } branch_route[2] { xlog("new branch at $ru\n"); } onreply_route[2] { xlog("incoming reply\n"); } failure_route[1] { if (t_was_cancelled()) { exit; } }