2 Oct
2007
2 Oct
'07
3:24 p.m.
Hi,
In your example, do you meant openser will trainsform Src-Leg to src_leg and Dst-Leg to
dst_leg?
After I followed your suggestion and changed the definition to,
ATTRIBUTE Src-Leg 1075 string
ATTRIBUTE Dst-Leg 1076 string
I get an error:
ERROR: acc: can't get code for the src_leg attribute
I have a feeling that it is case sensitive, and openser is looking for src_leg instead
Src-Leg.
Thanks
Sam.
----- Original Message ----
From: Norman Brandinger <norm(a)goes.com>
To: Live Great <livegreat007(a)yahoo.com>
Cc: users(a)openser.org
Sent: Tuesday, October 2, 2007 9:42:15 PM
Subject: Re: can't get code for the Failed attribute
Hello Sam,
The definition you used:
ATTRIBUTE src_leg 0 string
Probably isn't valid because "0" is more than likely already being
used. Notice that the various ATTRIBUTE numbers are all unique and just
increment. So use the next higher number that is available. If the
last ATTRIBUTE was 240 then your definition might look like:
ATTRIBUTE src_leg 241 string
You might also want to consider the general naming convention that is
used. The above example would then look as follows:
ATTRIBUTE Src-Leg 241 string
Note, when you get around to inserting this data into a database, the
column name will probably not be allowed to have a dash (unless the
column name is quoted).
Regards,
Norm
Live Great wrote:
It looks like it doesn't look up the dictionary
files in
/usr/local/share/freeradius/ directory.
But src_leg and dst_leg are not defined in the share directory.
Sam.
----- Original Message ----
From: Live Great <livegreat007(a)yahoo.com>
To: Norman Brandinger <norm(a)goes.com>
Cc: users(a)openser.org
Sent: Tuesday, October 2, 2007 10:17:47 AM
Subject: Re: can't get code for the Failed attribute
Hi Norman,
Thank you for the reply.
With the definition of "ATTRIBUTE src_leg 0 string", I got an error
"src_leg is not a number".
After changed it to the following definition,
ATTRIBUTE Acct-Status-Type 40 integer
ATTRIBUTE Service-Type 6 integer
ATTRIBUTE Event-Timestamp 55 integer
ATTRIBUTE Acct-Session-Id 44 string
ATTRIBUTE src_leg 1 integer
ATTRIBUTE dst_leg 1 integer
VALUE Acct-Status-Type Start 1
VALUE Acct-Status-Type Stop 2
VALUE Acct-Status-Type Failed 0
VALUE Service-Type Sip-Session 15
I still got this error:
ERROR:acc:extra2int: <src_leg> is not a number
Thanks
Sam
----- Original Message ----
From: Norman Brandinger <norm(a)goes.com>
To: Live Great <livegreat007(a)yahoo.com>
Cc: users(a)openser.org
Sent: Tuesday, October 2, 2007 9:43:41 AM
Subject: Re: can't get code for the Failed attribute
Hi Sam,
In /usr/local/share/freeradius/dictionary.rfc2866 there exists the
following entry:
VALUE Acct-Status-Type Failed 15
I'm not an expert in this area, but it appears that "Failed" is sort of
predefined. You probably should NOT use "Failed", instead create a
unique attribute such as "failed-reason". This is of course assuming
the rest of your definitions are good.
Please do not cross-post configuration questions of this type to the
developers mailing list.
Regards,
Norm
Live Great wrote:
mysql
function)
------------------------------------------------------------------------
Hi,
After added the following Attributes in the radiusclient-ng/dictionary
file:
ATTRIBUTE src_leg 0 string
ATTRIBUTE dst_leg 0 string
ATTRIBUTE Failed 0 string
I got the following error:
ERROR: acc: can't get code for the Failed attribute value
How to define a proper attribute in the dictionary file?
Thanks
Sam
----- Original Message ----
From: Norman Brandinger <norm(a)goes.com>
To: Live Great <livegreat007(a)yahoo.com>
Cc: devel(a)openser.org
Sent: Monday, October 1, 2007 9:01:54 PM
Subject: Re: [OpenSER-Devel] can't get code for the Sip-Response-Code
attribute
Good Morning,
You need to make sure the dictionary settings are correct and exactly
match what you have specified in OpenSER.
The dictionaries are specified in radiusclient-ng and in radiusd (and
mediaproxy if you use it)
The error is telling you that "Sip-Response-Code" cannot be found in any
of the dictionaries you have specified.
Regards,
Norm
Live Great wrote:
> Hi,
>
> I still can't this work, that's why I posted in the development forum.
>
> I have installed openser with *_ACC=ture uncommented in the
acc/Makfile.
But I
can't start openser now.
Here is the error when I executed /usr/local/etc/rc.d/openser start:
core:rc.d # ./openser start
Command Monit to start OpenSER...
'openser' start: /usr/local/etc/rc.d/openser
'openser' failed to start
Starting Open SIP Router:
Listening on
udp: 127.0.0.1 [127.0.0.1]:5060
udp: 12x.x.x..x [12x.x.x.x]:5060
Aliases:
udp: xxx.xxx..com.au:5060
udp: localhost.xxx.com.au:5060
udp: localhost:5060
In /var/log/messages:
ERROR: acc: can't get code for the Sip-Response-Code attribute
ERROR:acc:mod_init: failed to init radius
core:rc.d # ps -auxww | grep openser
root 35219 0.0 0.1 1520 728 p2 R+ 12:03AM 0:00.00 grep
openser
> core:rc.d # ps -auxww | grep radius
> root 35230 0.0 0.3 5004 3256 ?? Ss 12:04AM 0:00.00
> /usr/local/sbin/radiusd
> core:rc.d # ps -auxww | grep mysql
> mysql 75881 0.0 0.1 1732 1116 p1- I 20Sep07 0:00.02 /bin/sh
> /usr/local/bin/mysqld_safe
> --defaults-extra-file=/usr/local/var/db/mysql/my.cnf --user=mysql
> --datadir=/usr/local/var/db/mysql
> --pid-file=/usr/local/var/db/mysql/core.xxx.com.au.pid
> mysql 75924 0.0 2.7 49016 28336 p1- S 20Sep07 10:52.77 [mysqld]
> root 35237 0.0 0.1 1544 644 p2 RL+ 12:05AM 0:00.00 grep
Why I got thos acc errors when starting openser?
Thanks
SW
----- Original Message ----
From: Norman Brandinger <norm(a)goes.com>
To: Live Great <livegreat007(a)yahoo.com>
Cc: FreeRadius users mailing list
<freeradius-users(a)lists.freeradius.org>rg>; users(a)openser.org
Sent: Friday, September 28, 2007 11:11:23 PM
Subject: Re: [OpenSER-Users] Failed to compile openser with freeradius
support
Comment the FREERADIUS=1 in the openser/Makefile
Make sure that in modules/acc/Makefile ENABLE_RADIUS_ACC=true is not
commented
Regards,
Norm
Live Great wrote:
> HI,
>
> In FreeBSD 6.2, I got this error when I compiled openser with
> freeradius support.
>
> ../../radius.h:36:32: freeradius-client.h: No such file or directory
> acc.c: In function `init_acc_rad':
> acc.c:464: warning: assignment makes pointer from integer without
a cast
> > acc.c:475: error: `DICT_ATTR' undeclared (first use in this > > acc.c:475: error: (Each undeclared
identifier is reported only once
> > acc.c:475: error: for each function it appears in.)
> > acc.c:475: error: `da' undeclared (first use in this function)
> > acc.c:475: error: `DICT_VALUE' undeclared (first use in this
function)
> > acc.c:475: error: `dv' undeclared
(first use in this function)
> > acc.c: In function `acc_rad_request':
> > acc.c:509: error: `VALUE_PAIR' undeclared (first use in this
function)
>
acc.c:514: error: invalid lvalue in assignment
> acc.c:555: error: `OK_RC' undeclared (first use in this function)
> gmake[1]: *** [acc.o] Error 1
> gmake[1]: Leaving directory
> `/usr/ports/net/openser/work/openser-1.2.2-tls/modules/acc'
> gmake: *** [modules] Error 2
> *** Error code 2
>
> Stop in /usr/ports/net/openser.
> *** Error code 1
>
> Is there any way I can compile openser with freeradius support?
>
> Thanks
> SW
>
------------------------------------------------------------------------
>
>
_______________________________________________
Devel mailing list
Devel(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/devel