Re: [SR-Users] Using Sip-Router Logging & Register Problem Problem

** Hi Faisal, You say you added to syslog.conf: local1.* -/var/log/kamailio Is that exactly how it appears? If so, I think you need to remove the hyphen so it becomes: local1.* /var/log/kamailio As Sammy said, don't forget to restart syslog. Regards, Charles -----Original Message----- *From*: SamyGo &lt;govoiper(a)gmail.com &lt;SamyGo%20%3cgovoiper(a)gmail.com%3e&gt;&gt; *Reply-To*: SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List <sr-users@lists.sip-router.org<SIP%20Router%20-%20%22Kamailio%20%28OpenSER%29%20and%20SIP%20Express%20Router%20%28SER%29%20-%20Users%20Mailing%20List%22%20%3csr-users@lists.sip-router.org%3e> *To*: SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List <sr-users@lists.sip-router.org<SIP%20Router%20-%20%22Kamailio%20%28OpenSER%29%20and%20SIP%20Express%20Router%20%28SER%29%20-%20Users%20Mailing%20List%22%20%3csr-users@lists.sip-router.org%3e> *Subject*: Re: [SR-Users] Using Sip-Router Logging & Register Problem Problem *Date*: Tue, 29 May 2012 15:27:06 +0500 Did you restart your syslog ? Add xlog lines in yur config when you receive a REGISTER request so that it actually prints something out. On Tue, May 29, 2012 at 3:23 PM, Faisal Yousuf &lt;faisal.yousuf(a)gmail.com&gt; wrote: Hi Daniel/ Sammy , I made the changes in config as suggested (i.e. move the define variables at the top of the file rather then in the middle) Regarding setting debug=3 => I am setting WITH_DEBUG in the config file so based on processing of this symbol I believe debug=4 is set.# For the log facility in the kamailio.cfg I have set the option log_facility=LOG_LOCAL1 & in my syslog.cfg (attached again) I have set the following local1.* -/var/log/kamailio but still I dont see any logs in this location when I start kamailio I can see the kamailio process - (in total there are 19 processes here is the root process all other are child processes of this process) kamailio 3375 1 0 08:06 ? 00:00:00 /usr/local/sbin/kamailio -P /var/run/kamailio.pid -m 32 -M 4 -u kamailio -g kamailio I can also see kamailio starting to listen on port 5060 port on the local machine on both UDP & TCP interfaces I am using an xlite phone on windows to attempt to register - on my Kamailio VM (using UDP) I started a tcpdump to see if I am receiving the Register messages - I can see the register packets coming to the Kamailio hosts from the phone - but I dont see any responses from Kamailio. Also as there are no logs I dont know what is going wrong. Regards, Faisal On Tue, May 29, 2012 at 2:37 PM, SamyGo &lt;govoiper(a)gmail.com&gt; wrote: Hi Faisal, You say you've seen packets on kamailio but kamailio isn't replying !! 1- Please verify that yuor kamailio is indeed started *[ps -ef | grep kamailio]* 2- Verify if kamailio is actuallay listening on the same port as you are sending pcakets to ! *[netstat -pln|grep kamailio]* 3- Verify if your kamailio is using the same protocol as of your client i.e TCP or UDP or TLS etc. 4- instead of viewing the file* /var/log/kamailio* see*/var/log/messages *because you haven't mentioned local7 as Log facility in your config. I don't see your syslog*.conf * file in this mail! check that file and follow the referenced link<http://www.kamailio.org/dokuwiki/doku.php/utils:basic-syslog-config… completely. Also see your configurations kamailio.cfg file and use define tags from second line from top onward i.e just after #!KAMAILIO. Try getting rid of the comment line "*####### Defined Values #########*" - in my experience such comment before define cause trouble with configurations. See all these and then reply with updates. Regards, Sammy G. On Tue, May 29, 2012 at 2:18 PM, Daniel-Constantin Mierla < miconda(a)gmail.com&gt; wrote: Hello, you can set debug=3 in kamailio config to see very verbose debug messages. If you don't get any, means the request does not reach the application layer, meaning you have a firewall in place that drops the packets from the network. Cheers, Daniel On 5/29/12 8:02 AM, Faisal Yousuf wrote: Hi Experts, I am a newbee with SIP-Router/Kamailio - I installed Kamailio on a CentOS 5.5 VM - following the instructions from the following link http://kb.asipto.com/kamailio:install:3.0.x-from-git-centos5x Kamailio is installed & I can start kamailio deamon from service kamailio start However I also created two subscribers - but when I try to register my SIP Phone (by setting Kamailio as the domain to register to) - I can see my sip-phone sending the Register request to Kamailio (I put a tcpdump on the kamailio machine to see sip-messages reaching the host) but I dont get any response from Kamailio - so my sip phone reaches the 408 Registeration Timeout state. Now, I dont get any logs from Kamailio to know what is happening while my phone is sending the register request - I tried to configure logging following instructions from the following link http://www.kamailio.org/dokuwiki/doku.php/utils:basic-syslog-configuration But I dont get any logs in the /var/log/kamailio log file. To assist in understanding the issue - I am attaching the syslog config , kamailio config file & the kamailio service script in the init.d folder. My first objective will be to enable logging for kamailio & the next objective is to get the basic registration & routing between endpoints - my ultimate objective is to configure SER/Kamailio as a load-balancer for our B2BUA & Media Servers (I found the dispatcher module can help in accomplishing this) - Can anybody help me in identifying why I am not getting any logs ? I have already seen the wiki & have developed some understanding regarding how Kamailio is configured but am I seeking more information regarding the route language - (the state-model + reference of the functions that can be used in the route script etc.) - in this regards if I can get any documentation pointers from the user community that can help me gain a better understanding the use of Kamailio for above it will be great Regards, Faisal Regards, Faisal _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/micondaKamailio Advanced Training, Seattle, USA, Sep 23-26, 2012 - http://asipto.com/u/katu _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users