Hi,

 

i tried to change the ds_probing_mode as well. it didn't do any good.

i need the probing mode to be set to 1 anyway.

 

so,

any ideas?

 

here is the cfg again:

 

after the failure route i turn to this route

 

"route[OSPRPLERR] {
xlog("$C(rg) SCRIPT : in OSPRPLERR $ru $C(xx)\n");
if($avp(OSPRPL)!=404) {
 xlog("$C(rg) OSPRPL is $avp(OSPRPL) now disable destination $C(xx)\n");
 ds_mark_dst("AP");
 xlog("$C(rg) after disabling destination $C(xx)\n");
 }"

 

 

here is the log:

13(5760) ERROR: <script>:  SCRIPT : in OSPRPLERR sip:36264529@10.10.21.29
13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1264 a=17 n=if
13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1259 a=26 n=xlog
13(5760) ERROR: <script>:  OSPRPL is 408 now disable destination
13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1260 a=26 n=ds_mark_dst
13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1261 a=26 n=xlog
13(5760) ERROR: <script>:  after disabling destination

now i check the dispatcher list status:

 

kamctl fifo ds_list

SET:: 47
        URI:: sip:10.10.21.20 flags=AX priority=25 attrs=OSP_B4
        URI:: sip:10.10.21.22 flags=AX priority=25 attrs=OSP_B3
        URI:: sip:10.10.21.23 flags=AX priority=25 attrs=OSP_B2
        URI:: sip:10.10.21.21 flags=AX priority=25 attrs=OSP_B1
SET:: 41
        URI:: sip:10.10.21.29 flags=AX priority=25 attrs=OSP_A4
        URI:: sip:10.10.21.27 flags=AX priority=25 attrs=OSP_A3
        URI:: sip:10.10.21.25 flags=AX priority=25 attrs=OSP_A1
        URI:: sip:10.10.21.24 flags=AX priority=25 attrs=OSP_A2

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- 
Daniel-Constantin Mierla -- http://www.asipto.com
http://linkedin.com/in/miconda -- http://twitter.com/miconda